- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
FACE MILL: D50.0MM LINEPRO 20190 (PALBIT)
SKU:
FC-9555548B
FACE MILL: D52.0MM TOROMILL (PALBIT)
SKU:
FC-9555548C
FACE MILL: D63.0MM LINEPRO 20190 (PALBIT)
SKU:
FC-9555548D
FACE MILL: D50.0MM TOROMILL X2 35190 (PALBIT)
SKU:
FC-9555548E
* PALBIT TORO milling tools are used when special requirements are placed on the metal removal rate, with increased width of cut or higher feed rate.
* Performance that conventional tools cannot provide.
* Toro tools are particularly suitable for roughing and prefinishing.
Milling Operations
Profiling, Facing, Slotting, Helical Interpolation, Ramp Down
FACE MILL: D63.0MM TOROMILL X2 35190 X2 (PALBIT)
SKU:
FC-9555549
* PALBIT TORO milling tools are used when special requirements are placed on the metal removal rate, with increased width of cut or higher feed rate.
* Performance that conventional tools cannot provide.
* Toro tools are particularly suitable for roughing and prefinishing.
Milling Operations
Profiling, Facing, Slotting, Helical Interpolation, Ramp Down
FACE MILL: D63.0MM HIFEED 06690 (PALBIT)
SKU:
FC-9555549A
FACE MILL: D63.0MM TOROMILL (PALBIT)
SKU:
FC-9555550
FACE MILL: D63.0MM PLUS 17590 (PALBIT)
SKU:
FC-9555550A
FACE MILL: D63.0MM PENTA HI-FEED 06320 (PALBIT)
SKU:
FC-9555550B
FACE MILL: D80.0MM TOROMILL (PALBIT)
SKU:
FC-9555551
FACE MILL: D80.0MM LINEPRO 20290 (PALBIT)
SKU:
FC-9555552
FACE MILL: D80.0MM PLUS 90845 (PALBIT)
SKU:
FC-9555553
FACE MILL: D80.0MM HIFEED 06690 (PALBIT)
SKU:
FC-9555554
FACE MILL: D80.0MM PLUS 17590 (PALBIT)
SKU:
FC-9555556
FACE MILL: D100MM PLUS 90945 45DEG (PALBIT)
SKU:
FC-9555560
FACE MILL: D100MM PLUS 90845 (PALBIT)
SKU:
FC-9555561
FACE MILL: D100MM PLUS 90260 (PALBIT)
SKU:
FC-9555562
* The PLUS series features a highly effective 45° face mill with very strong pentagonal inserts with positive cutting angles.
* The result is effective machining with 10 cornered inserts for lower costs.
* Wiper edge for better surface finish.
* Long tool life with MEGA coating and excellent chip control.
FACE MILL: D100MM LINEPRO 18090 (PALBIT)
SKU:
FC-9555565
FACE MILL: LINEPRO 18090: SCREW
SKU:
FC-9555565S
FACE MILL: D80MM FAST ALUMINIUM CUTTER (PALBIT)
SKU:
FC-9555590
* ALUPRO are 90° face milling cutters for milling aluminum at very high rotational spindle speeds.
* The cutters help maximize metal removal rate and minimize production costs.
* Sharp, ground cutting edge for low cutting forces and a clean cut.
Milling Operations: Shouldering, Facing, Slotting, Helical Interpolation, Ramp Down, Plunging & Recessing
FACE MILL: D32MM FAST ALUMINIUM CUTTER (PALBIT)
SKU:
FC-9555599
* ALUPRO are 90° face milling cutters for milling aluminum at very high rotational spindle speeds.
* The cutters help maximize metal removal rate and minimize production costs.
* Sharp, ground cutting edge for low cutting forces and a clean cut.
Milling Operations: Shouldering, Facing, Slotting, Helical Interpolation, Ramp Down, Plunging & Recessing
CYLINDRICAL SHANK ADAPTOR M6 (PALBIT)
SKU:
FCA-9555532
CYLINDRICAL SHANK ADAPTOR M8 (PALBIT)
SKU:
FCA-9555534
CYLINDRICAL SHANK ADAPTOR M10 (PALBIT)
SKU:
FCA-9555536
CYLINDRICAL SHANK ADAPTOR M12 (PALBIT)
SKU:
FCA-9555538
FLY CUTTER SET: 3PC 1/2″ STRAIGHT SHANK
SKU:
FLC620000
FLY CUTTER SET: 3PC 3/4″ STRAIGHT SHANK
SKU:
FLC620200
FLY CUTTER: R-8 TAPER X 2-1/2″ DIAMETER
SKU:
FLC621400
FLY CUTTER: NT30 TAPER X 2-1/2″ DIAMETER
SKU:
FLC621600
FLY CUTTER: NT40 TAPER X 3″ DIAMETER
SKU:
FLC621605
1 FLUTE UP-SPIRAL: 3MM DIAMETER
SKU:
FRS100120
1 FLUTE UP-SPIRAL: 4MM DIAMETER
SKU:
FRS100130
1 FLUTE UP-SPIRAL: 6MM DIAMETER
SKU:
FRS100135
1 FLUTE UP-SPIRAL: 8MM DIAMETER
SKU:
FRS100140
1 FLUTE UP-SPIRAL: 10MM DIAMETER
SKU:
FRS100145
2 FLUTE UP-SPIRAL: 3MM DIAMETER
SKU:
FRS100150
2 FLUTE UP-SPIRAL: 8MM DIAMETER
SKU:
FRS100165
2 FLUTE UP-SPIRAL: 10MM DIAMETER
SKU:
FRS100170
2 FLUTE DOWN-SPIRAL: 10MM DIAMETER
SKU:
FRS100235
ENGRAVING BIT: 0.25MM DIAMETER
SKU:
FRS100250
ENGRAVING BIT: 0.75MM DIAMETER
SKU:
FRS100260
2 FLUTE COMPRESSION BIT: 10MM DIAMETER
SKU:
FRS100290
3 FLUTE COMPRESSION BIT: 9.5MM DIAMETER
SKU:
FRS100315
3 FLUTE COMPRESSION BIT: 10MM DIAMETER
SKU:
FRS100320
HOLESAW ARBOR: 32-200MM 7/16″ HEX SHANK 5/8″X 18UNF
SKU:
HLA3752116
HOLESAW ARBOR: 32-200MM 5/8″ HEX SHANK 5/5″X 18UNF
SKU:
HLA3752120
HOLESAW ARBOR: 32-200MM SDS SHANK
SKU:
HLA3752146
HOLESAW SET: 6PC SET ELECTRICIANS
SKU:
HLC3756020
HOLESAW SET: 9PC SET 22 29 35 44 51 64MM
SKU:
HLC3756030
HOLESAW SET: 9PC PLUMBERS SET
SKU:
HLC3756040
HOLESAW SET: 11PC COMBINATION
SKU:
HLC3756060
HOLESAW: HSS-M42 14MM 9/16″
SKU:
HLS3751014
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 16MM 5/8″
SKU:
HLS3751016
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 17MM 11/16″
SKU:
HLS3751017
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 19MM 3/4″
SKU:
HLS3751019
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 20MM 25/32″
SKU:
HLS3751020
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 21MM 13/16″
SKU:
HLS3751021
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 22MM 7/8″
SKU:
HLS3751022
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 24MM 15/16″
SKU:
HLS3751024
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 25MM 1″
SKU:
HLS3751025
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 27MM 1-1/16″
SKU:
HLS3751027
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 29MM 1-1/8″
SKU:
HLS3751029
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 30MM 1-3/16″
SKU:
HLS3751030
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 32MM 1-1/4″
SKU:
HLS3751032
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 33MM 1-5/16″
SKU:
HLS3751033
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 35MM 1-3/8″
SKU:
HLS3751035
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 37MM 1-7/16″
SKU:
HLS3751037
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 38MM 1-1/2″
SKU:
HLS3751038
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 40MM 1-9/16″
SKU:
HLS3751040
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 41MM 1-5/8″
SKU:
HLS3751041
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 43MM 1-11/16″
SKU:
HLS3751043
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 44MM 1-3/4″
SKU:
HLS3751044
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 46MM 1-13/16″
SKU:
HLS3751046
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee
HOLESAW: HSS-M42 48MM 1-7/8″
SKU:
HLS3751048
* ETS holesaws are manufactured from quality HSS-M42 ( 8% Cobalt) for durablity and long service life
* These are suitable for drilling a wide range of materials
* ETS hole saws offer best flexibility and reliability for this Pro-cut hole saws series for use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines
* The hole saw body is suitable on all types of machines
* Suitable for most types of materials, carbon steels, stainless steels
* It is also great for drilling in non-ferrous metals such as aluminum, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material
* Pro-Cut Hole Saws are available in the diameter range of 14 – 150 mm, at cutting depths of 12 - 60mm
* It is important to use the correct cutting fluid when drilling to satisfy warrantee