- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DRILL: 4MT 47.0MM TAPERED SHANK ETS
SKU:
DTS2604700
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 47.5MM TAPERED SHANK ETS
SKU:
DTS2604750
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 47.5MM TAPERED SHANK POLDI
SKU:
DTS2604750P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: 4MT 48.0MM TAPERED SHANK ETS
SKU:
DTS2604800
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 48.5MM TAPERED SHANK ETS
SKU:
DTS2604850
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 48.5MM TAPERED SHANK POLDI
SKU:
DTS2604850P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: 4MT 49.0MM TAPERED SHANK ETS
SKU:
DTS2604900
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 49.5MM TAPERED SHANK ETS
SKU:
DTS2604950
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 50.0MM TAPERED SHANK ETS
SKU:
DTS2605000
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 50.0MM TAPERED SHANK (SOMTA)
SKU:
DTS2605000S
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
* This drill is manufactured by Somta SA
DRILL: 5MT 51.0MM TAPERED SHANK ETS
SKU:
DTS2605100
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 5MT 55.0MM TAPERED SHANK ETS
SKU:
DTS2605500
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 5MT 63.0MM TAPERED SHANK (SOMTA)
SKU:
DTS2606498
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 5MT 65.0MM TAPERED SHANK (SOMTA)
SKU:
DTS2606500
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 5MT 67.0MM TAPERED SHANK ETS
SKU:
DTS2606700
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: MT1 19/64″ TAPERED SHANK
SKU:
DTS2621017
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 1MT 17/64″ TAPERED SHANK POLDI
SKU:
DTS2621017P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: MT3 13/32″ TAPER SHANK
SKU:
DTS2621026P
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 1MT 7/16″ TAPERED SHANK ETS
SKU:
DTS2621028
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 1MT 7/16″ TAPERED SHANK POLDI
SKU:
DTS2621028P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: 1MT 29/64″ TAPERED SHANK POLDI
SKU:
DTS2621029P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank*
DRILL: 1MT 15/32″ TAPERED SHANK POLDI
SKU:
DTS2621030P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: 2MT 5/8″ TAPERED SHANK ETS
SKU:
DTS2621040
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 2MT 11/16″ TAPERED SHANK ETS
SKU:
DTS2621044
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 2MT 57/64″ TAPERED SHANK POLDI
SKU:
DTS2622059P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: 3MT 59/64″ TAPERED SHANK POLDI
SKU:
DTS2622059PP
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: 3MT 15/16″ TAPERED SHANK ETS
SKU:
DTS2622060
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 3MT 31/32″ TAPERED SHANK ETS
SKU:
DTS2623062
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 3MT 63/64″ TAPERED SHANK POLDI
SKU:
DTS2623063P
* These taper shank drills are manufactured by Poldi in the Czech Republic from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece
* Very accurate centering, designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank
DRILL: MT3 1-7/32″ TAPERED SHANK ETS
SKU:
DTS2623114
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: MT4 1-1/4″ TAPER SHANK
SKU:
DTS2623116
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: 4MT 1-13/32″ TAPERED SHANK ETS
SKU:
DTS2624126
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DRILL: MT4 1-9/16″ TAPER SHANK
SKU:
DTS2624136
* These taper shank drills are manufactured from quality HSS-M2 for durability and long service life
* Taper shank drills offer high torque transmission provided the bit is driven hard into the workpiece, Very accurate centering , designed to cater for all engineers drilling needs and offer a solution to all drilling problems where other drills cannot cope or stand up to modern manufacturing speeds and methods
* The Morse Taper Shank series drills come in HSS and HSS-Co variants, in MT1, MT2, MT3, MT4, MT5 and MT6 tapers
* Can be mounted into a lathe tailstock or directly into a spindle tool
* Primarily used in lathes and milling machines, the morse taper shank drill has excellent accuracy and can withstand greater force on the shank *
DIAMOND DRESSER: 1/2 CARAT 12.5 X 150MM
SKU:
DW-289050
DIAMOND DRESSER: 3/4 CARAT 12.5 X 150MM
SKU:
DW-289054
DIAMOND DRESSER: 1.0 CARAT 12.5 X 150MM
SKU:
DW-289058
DIAMOND DRESSER: 1.5 CARAT 12.5 X 150MM
SKU:
DW-289060
DIAMOND DRESSER: 2.0 CARAT 12.5 X 150MM
SKU:
DW-289064
DIAMOND DRESSER: 1/2 CARAT 8.0 X 160MM
SKU:
DW-289100
DIAMOND DRESSER: 3/4 CARAT 8.0 X 160MM
SKU:
DW-289110
DIAMOND DRESSER: 1.0 CARAT 8.0 X 160MM
SKU:
DW-289150
DIAMOND WHEEL DRESSER: T-TYPE
SKU:
DW-289170
END MILL: 3.0MM XEP CARBIDE 3 FLUTE SQUARE END
SKU:
EM-500920
*These End Mills are manufactured from qualiity HRC-55 carbide for durability and long service life - short flute with square end
* Suitable for Stainless steel, Tough steel and cast iron and mild steel at High Feedrate
* These cutters are short length with minimum flute length and offer lminimum deflection
* Have helex angle of 45 deg
END MILL: 4.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS
SKU:
EM-500954
END MILL: 5.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS
SKU:
EM-500955
END MILL: 6.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS
SKU:
EM-500956
END MILL: 6.0MM HRC60 CARBIDE 4 FLT CORNER RADIUS LONG
SKU:
EM-500957
END MILL: 8.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS
SKU:
EM-500958
END MILL: 8.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS LONG
SKU:
EM-500959
END MILL: 10.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS
SKU:
EM-500960
END MILL: 10.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS LONG
SKU:
EM-500962
END MILL: 12.0MM HRC60 CARBIDE 4 FLT CORNER RADIUS
SKU:
EM-500964
END MILL: 12.0MM HRC65 CARBIDE 4 FLT CORNER RADIUS LONG
SKU:
EM-500966
END MILL: 3.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501003
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 4.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501004
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 5.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501005
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 6.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501006
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 8.0MM VARIABLE HELIX HRS70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501008
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 10.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501010
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 12.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501012
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 14.0MM VARIABLE HELIX HRC70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501014
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 16.0MM VARIABLE HELIX HES70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501016
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 18.0MM VARIABLE HELIX HES70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501018
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 20.0MM VARIABLE HELIX HES70 CARBIDE 4 FLUTE (SEA)
SKU:
EM-501020
*These 4 flute HRC70 end mills are manufactured from quality Nano grain carbide for durability and long service life
* The variiable helex configeration performs quick stock removal
* Large flute gullet for smooth chip removal - Grain size: 0.2um
* Suitable for Stainless, Carbon, Alloy steels and Titainium etc
* Finished in black Nano coating for extendel cutting life
* These cutters have out performed conventional end mills and are our most popular seller !
Applications: Side milling, Slotting & Forming
END MILL: 6.0MM HRC65 ALUMINIUM U GROOVE 3 FLUTE STD
SKU:
EM-502006
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
*
END MILL: 6.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE X/LONG
SKU:
EM-502006X
*These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* These are the Extra long series which have very popular
* Smooth finish with no chatter marks
END MILL: 8.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE STD
SKU:
EM-502008
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
END MILL: 8.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE X/LONG
SKU:
EM-502008X
*These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute configeration
* Coated with DLC for longer tool life
* Customers have praised the efficency of these cutters
* These are the Extra long series which have very popular
* Smooth finish with no chatter marks
END MILL: 10.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE STD
SKU:
EM-502010
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
END MILL: 10.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE LONG
SKU:
EM-502010A
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
END MILL: 12.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE STD
SKU:
EM-502012
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
END MILL: 12.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE LONG
SKU:
EM-502012A
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
END MILL: 14.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE STD
SKU:
EM-502014
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks
END MILL: 16.0MM HRA65 ALUMINUM U GROOVE 3 FLUTE STD
SKU:
EM-502016
* These 3 flute end mills are manufactured from quality carbide for durability and long service life
* The vatiable helex configeration is suitable for Aluminum machining
* Quick material removal due to the 3 flute grooved configeration
* Coated with DCL for longer tool life
* Customers have praised the efficency of these cutters
* Smooth finish with no chatter marks