- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DIE: ROUND 1-1/8″ X 7 BSW OD 2″
SKU:
DIE6149110
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-1/4″ X 7 BSW OD 2″
SKU:
DIE6149120
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-3/8″ X 6 BSW OD 2″
SKU:
DIE6149130
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-1/2″ X 6 BSW OD 2″
SKU:
DIE6149140
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/16″X 27 NPT HSS OD 2″
SKU:
DIE6160210
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/8″ X 27 NPT HSS OD 2″
SKU:
DIE6160220
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/4″ X 18 NPT HSS OD 1-1/2″
SKU:
DIE6160230
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/8″ X 18 NPT HSS OD 2″
SKU:
DIE6160240
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/2″ X 14 NPT HSS OD 2″
SKU:
DIE6160250
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/8″ X 14 NPT HSS OD 2″
SKU:
DIE6160260
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/4″ X 14 NPT HSS OD 2″
SKU:
DIE6160270
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/8″ X 14 NPT HSS OD 2″
SKU:
DIE6160280
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1″ X 11.5 NPT HSS OD 2″
SKU:
DIE6160290
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-1/8″ X 11.5 NPT HSS OD 2″
SKU:
DIE6160300
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-1/4″ X 11.5 NPT HSS OD 2″
SKU:
DIE6160310
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-3/8″ X 11.5 NPT HSS OD 2″
SKU:
DIE6160320
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE ROUND: 1-1/2″ X 11.5 NPT HSS
SKU:
DIE6160330
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1-3/4″ X 11.5 NPT HSS OD 2″”
SKU:
DIE6160340
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE ROUND : 2″ X 11.5 NPT HSS
SKU:
DIE6160350
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M4 X 0.7 LEFT HAND HSS OD 3/4″
SKU:
DIE6188042
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M5 X 0.8 LEFT HAND HSS OD 3/4″
SKU:
DIE6188044
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M6 X 1.0 LEFT HAND HSS OD 3/4″
SKU:
DIE6188046
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M8 X 1.25 LEFT HAND HSS OD 1″
SKU:
DIE6188048
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M10 X 1.5 LEFT HAND HSS OD 1″
SKU:
DIE6188050
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M12 X 0.75 LEFT HAND HSS OD 1″
SKU:
DIE6188051
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M12 X 1.75 LEFT HAND HSS OD 1-1/2″
SKU:
DIE6188052
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M16 X 2.0 LEFT HAND HSS OD 1-3/4″
SKU:
DIE6188056
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M18 X 2.5 LEFT HAND HSS OD
SKU:
DIE6188058
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M20 X 2.5 LEFT HAND HSS OD 1-3/4″
SKU:
DIE6188060
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M22 X 2.5 LEFT HAND HSS OD 2″
SKU:
DIE6188062
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M24 X 3.0 LEFT HAND HSS OD 2″
SKU:
DIE6188064
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M2.0 X 0.40 OD 13/16″” METRIC COARSE HSS
SKU:
DIE6189001
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M2.5 X 0.45 OD 13/16″ METRIC COARSE HSS
SKU:
DIE6189003
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M3 X 0.5 OD 13/16″ METRIC COARSE HSS
SKU:
DIE6189005
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M4 X 0.7 OD 13/16″ METRIC COARSE HSS
SKU:
DIE6189009
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M5 X 0.8 OD 13/16″ METRIC COARSE HSS
SKU:
DIE6189011
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M6 X 1.0 OD 1″ METRIC COARSE HSS
SKU:
DIE6189013
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M7 X 1.0 OD 1″ METRIC COARSE HSS
SKU:
DIE6189015
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M8 X 1.25 OD 1″ METRIC COARSE HSS
SKU:
DIE6189017
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M10 X 1.5 OD 1″ METRIC COARSE HSS
SKU:
DIE6189019
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M12 X 1.75 OD 1″ METRIC COARSE HSS
SKU:
DIE6189021
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M14 X 2.0 OD 1-1/2″ METRIC COARSE HSS
SKU:
DIE6189023
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M16 X 2.0 OD 1-1/2″ METRIC COARSE HSS
SKU:
DIE6189025
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!* All our dies are manufactured fro quality HSS-M2 for durability and long service life * These are split type dies which allow for fine adjustment *
DIE: ROUND M18 X 2.5 OD 1-1/2″ METRIC COARSE HSS
SKU:
DIE6189027
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M20 X 2.5 OD 1-1/2″ METRIC COARSE HSS
SKU:
DIE6189029
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M22 X 2.5 OD 2″ METRIC COARSE HSS
SKU:
DIE6189031
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M24 X 3.0 OD 2″ METRIC COARSE HSS (SOMTA)
SKU:
DIE6189033
** About this item **
* Manufactured by Somta
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M30 X 3.5 OD 2″ METRIC COARSE HSS (SOMTA)
SKU:
DIE6189045
** About this item **
* Manufactured by Somta
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M3 X 0.5 METRIC CARDED
SKU:
DIE6189050
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M4 X 0.7 METRIC CARDED
SKU:
DIE6189052
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M5 X 0.8 METRIC CARDED
SKU:
DIE6189054
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M6 X 1.0 METRIC CARDED
SKU:
DIE6189056
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M8 X 1.25 METRIC CARDED
SKU:
DIE6189058
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M10 X 1.5 METRIC CARDED
SKU:
DIE6189060
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M12 X 1.75 METRIC CARDED
SKU:
DIE6189062
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M14 X 2.0 METRIC CARDED
SKU:
DIE6189064
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M16 X 2.0 METRIC CARDED
SKU:
DIE6189066
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
CONDUIT DIE SET: M20 & M25 X 1.5 WITH HOLDER
SKU:
DIE6189090
DIE: ROUND M27 X 1.5 OD 2″ METRIC FINE HSS
SKU:
DIE6206240
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M28 X 1.5 OD 2″ METRIC FINE HSS
SKU:
DIE6206242
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M30 X 1.5 OD 2″ METRIC FINE HSS (SOMTA)
SKU:
DIE6206244
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M9 X 1.0 OD 1″ METRIC FINE HSS
SKU:
DIE6208212A
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M5 X 0.5 OD 13/16″ METRIC FINE HSS (SOMTA)
SKU:
DIE6209207
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M6 X 0.75 OD 1″ METRIC FINE HSS
SKU:
DIE6209209
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M6 X 1.0 OD 1″ METRIC FINE HSS
SKU:
DIE6209210
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M8 X 1.0 OD 1″ METRIC FINE HSS
SKU:
DIE6209212
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M10 X 0.75 OD 30.0MM METRIC FINE HSS
SKU:
DIE6209212B
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M10 X 1.0 OD 1″ METRIC FINE HSS
SKU:
DIE6209213
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M10 X 1.25 OD 1″ METRIC FINE HSS
SKU:
DIE6209215
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M12 X 1.25 OD 1″ METRIC FINE HSS
SKU:
DIE6209218
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M12 X 1.5 OD 1-1/2″ METRIC FINE HSS
SKU:
DIE6209221
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M14 X 1.25 OD 1-1/2″ METRIC FINE HSS
SKU:
DIE6209222
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M14 X 1.50 OD 1-1/2″ METRIC FINE HSS
SKU:
DIE6209224
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M20 X 1.5 OD 1-1/2″ METRIC FINE HSS
SKU:
DIE6209230
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M22 X 1.50 OD 2″ METRIC FINE HSS (SOMTA)
SKU:
DIE6209234
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M24 X 1.5 OD 2″ METRIC FINE HSS (SOMTA)
SKU:
DIE6209236
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M25 X 1.5 OD 55MM METRIC FINE HSS (SPEC)
SKU:
DIE6209238
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND M26 X 1.5 OD 2″ METRIC FINE HSS
SKU:
DIE6209240
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/16″ X 28 BSP HSS OD 30.0MM
SKU:
DIE6221008
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/8″ X 19 BSP HSS OD 30.0MM
SKU:
DIE6221010
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!