- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
SCMT-120408-MP- PHG115 (PALBIT) TURNING
SKU:
LTT900192A
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SCMT-120412-MP- PHG125 (PALBIT) TURNING
SKU:
LTT900193
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SCMT-120412-MP- PHG115 (PALBIT) TURNING
SKU:
LTT900193A
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 160404 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900198
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 160408 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900200
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 160412 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900202
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 160416 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900204
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 220404 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900206
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 220408 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900208
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 220412 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900210
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
TNMG: 220416 R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900212
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WNMG : 060404 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900230
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WNMG : 060408 – R3 -PM – PHG115 (PALBIT) TURNING
SKU:
LTT900232
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WNMG : 080404 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900234
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WNMG : 080408 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900236
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WNMG : 080412 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900238
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WNMG : 080416 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900240
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
WCMX 06T308 -PH6920 (PALBIT) TURNING
SKU:
LTT900244
DNMG : 150404 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900250
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150408 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900252
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150412 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900254
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150416 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900256
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150604 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900258
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150608 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900260
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150612 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900262
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
DNMG : 150616 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900264
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 090304 – MR -R3- PHG125 (PALBIT) TURNING
SKU:
LTT900276
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 090304 – MR -R3- PH5115 (PALBIT) TURNING
SKU:
LTT900276A
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 090308 – MR -R3- PHG125 (PALBIT) TURNING
SKU:
LTT900278
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 120404 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900280
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 120408-PM – PHG125 (PALBIT) TURNING
SKU:
LTT900282
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 120412 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900284
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMG : 120416 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900288
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMG : 090304 – SS – PH7920 (PALBIT) TURNING
SKU:
LTT900295
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMG : 120404 – R3 -PM – PHG125 (PALBIT) TURNING
SKU:
LTT900300
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMG : 120408 – R3 – PM – PHG125 (PALBIT) TURNING
SKU:
LTT900302
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMG : 120412 – R3 – PM – PHG125 (PALBIT) TURNING
SKU:
LTT900304
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMG : 120416 – R3 – PM – PHG125 (PALBIT) TURNING
SKU:
LTT900306
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMM : 150608 – R3 – RP – PHG125 (PALBIT) TURNING
SKU:
LTT900320
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMM : 150612 – R3 – RP – PHG125 (PALBIT) TURNING
SKU:
LTT900322
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
SNMM : 150616 – R3 – RP – PHG125 (PALBIT) TURNING
SKU:
LTT900324
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
VNMG : 160404 – R3 – PM – PHG125 (PALBIT) TURNING
SKU:
LTT900340
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
VNMG : 160408 – R3 – PM – PHG125 (PALBIT) TURNING
SKU:
LTT900342
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMM : 160608 -RP-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900380
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMM : 160612 -RP-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900382
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMM : 160616 -RP-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900386
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMM : 190612 -RP-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900388
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMM : 190616 -RP-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900390
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
CNMM : 190624 -RP-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900392
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
RNMG : 090300 -ST-R3-P-PHG125 (PALBIT) TURNING
SKU:
LTT900450
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
RNMG : 120400 -ST-R3-P-PH5740 (PALBIT) TURNING
SKU:
LTT900459
* Excellent chip control even when machining with a small depth of cut * Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance * The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear *
Techical Features (PHG) for high wear resistance and long life *
XPET: 060210 P3 ZER-HF PH7930 (PALBIT) MILLING
SKU:
LTT900500
XPET: 100308 PDSR – MP -PH7910 (PALBIT) MILLING
SKU:
LTT900650
XPET: 100308 PDSR – MP – PH7920 (PALBIT) MILLING
SKU:
LTT900650A
XPET: 100308 PDSR-LP -PHP730 (PALBIT) MILLING
SKU:
LTT900650B
XPET: 100308 PDER – LP -PH7920 (PALBIT) MILLING
SKU:
LTT900665
XPET: 100308 PDER – LP -PHH930 (PALBIT) MILLING
SKU:
LTT900665A
XPET: 100308 PDER – LP -PHP930 (PALBIT) MILLING
SKU:
LTT900667
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
XPET: 100308 PDSR – MP -PHP920 (PALBIT) MILLING
SKU:
LTT900668
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
XPET: 100312 ZDR – HF – PH7920 (PALBIT) MILLING
SKU:
LTT900680
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
XPET: 100312 ZDR – HF – PHP920 (PALBIT) MILLING
SKU:
LTT900686
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 06T102 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900800
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 06T104 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900802
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 090202 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900806
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 090204 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900808
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 110202 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900810
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 110204 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900812
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 110208 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900814
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 110302 – FM – PHS225 (PALBIT) TURNING
SKU:
LTT900816
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 110304 – FM – PHS125 (PALBIT) TURNING
SKU:
LTT900818
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 110308 – FM – PHS125 (PALBIT) TURNING
SKU:
LTT900820
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCMT: 16T304 – FP – PHG125 (PALBIT) TURNING
SKU:
LTT900822
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TCGT: 16T304 – LN – PH7910 (PALBIT) TURNING
SKU:
LTT900900
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
APMT: 110308 – PDER PVD PH6740 (PALBIT) TURNING
SKU:
LTT922222
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
Techical Features (PHG) for high wear resistance and long life
* Suitable for wet or dry machining both internal & external
* Heat resistant substrade offering continous operation *
APMT: 1604 – PDER PVD PH6740 (PALBIT) TURNING
SKU:
LTT922224
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
Techical Features (PHG) for high wear resistance and long life
* Suitable for wet or dry machining both internal & external
* Heat resistant substrade offering continous operation
APMT: 1604-PDER-H2 SEAYAC (FOR STAINLESS) TURNING
SKU:
LTT922226
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life
* Suitable for wet or dry machining both internal & external
* Heat resistant substrade offering continous operation
TPKR: 1603PPR-PDSR M/INSERT (PALBIT) MILLING
SKU:
LTT922251
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TPKR: 2204PPR-PDSR M/INSERT (PALBIT) MILLING
SKU:
LTT922252
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions
TPMR: 110304 – 13 – PH5125 (PALBIT) MILLING
SKU:
LTT922900
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut
* Proper rake angle of cutting surface finish and low cutting resistance
PALBIT Company has been manufacturing tooling for over 100 years !
In later years it has specialised in quality tooling and carbide inserts.
* This up to date factory produces the top European quality Inserts from virgin carbide and has a worldwide market and recognised for quality and performance
* The latest coating technology improves the cutting operation and offer prolonged tool life while under extreme conditions