- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAP: M60.0 X 5.5 BOTTOM METRIC COARSE
SKU:
TAP3156488
* These are Metric coarse third or bottom hand taps
* All our tap are manufactured from quality HSS-M2 for durability and long tool life
* Threads are precision ground and offer excellent cutting and smooth threads
* Bottom taps come with a 2 thread lead in
* Suitable for blind or through hole tapping
TAP: M64.0 X 6.0 BOTTOM METRIC COARSE
SKU:
TAP3156492
* These are Metric coarse third or bottom hand taps
* All our tap are manufactured from quality HSS-M2 for durability and long tool life
* Threads are precision ground and offer excellent cutting and smooth threads
* Bottom taps come with a 2 thread lead in
* Suitable for blind or through hole tapping
TAP: M68.0 X 6.0 BOTTOM METRIC COARSE
SKU:
TAP3156494
* These are Metric coarse third or bottom hand taps
* All our tap are manufactured from quality HSS-M2 for durability and long tool life
* Threads are precision ground and offer excellent cutting and smooth threads
* Bottom taps come with a 2 thread lead in
* Suitable for blind or through hole tapping
TAP SET: 3PC M3.0 X 0.35 HSS-M2 METRIC FINE
SKU:
TAP3161203
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M4.0 X 0.5 HSS-M2 METRIC FINE
SKU:
TAP3161204
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M5.0 X 0.5 HSS-M2 METRIC FINE
SKU:
TAP3161205
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M6.0 X 0.75 HSS-M2 METRIC FINE
SKU:
TAP3161206
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M8.0 X 1.0 HSS-M2 METRIC FINE
SKU:
TAP3161207
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M10.0 X 1.0 HSS-M2 METRIC FINE (CONDUIT)
SKU:
TAP3161208
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M10.0 X 1.25 HSS-M2 METRIC FINE
SKU:
TAP3161209
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M12.0 X 1.25 HSS-M2 METRIC FINE (SPARK PLUG)
SKU:
TAP3161210
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M12.0 X 1.50 HSS-M2 METRIC FINE
SKU:
TAP3161212
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M14.0 X 1.25 HSS-M2 METRIC FINE (SPARK PLUG)
SKU:
TAP3161213
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M14.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161214
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M16.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161216
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M18.0 X 1.5 HSS-M2 METRIC FINE (SPARK PLUG)
SKU:
TAP3161218
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M20.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161220
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M22.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161222
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M24.0 X 2.0 HSS-M2 METRIC FINE
SKU:
TAP3161224
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M24.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161225
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M32.0 X 1.5 HSS-M2 METRIC FINE (CONDUIT)
SKU:
TAP3161232
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M40.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161240
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC M50.0 X 1.5 HSS-M2 METRIC FINE
SKU:
TAP3161250
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1 X 64 HSS=M2 UNC HAND TAPS
SKU:
TAP3201010
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 2 X 56 HSS-M2 UNC HAND TAPS
SKU:
TAP3201012
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 3 X 48 HSS-M2 UNC HAND TAPS
SKU:
TAP3201014
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 4 X 40 UNC HAND TAPS
SKU:
TAP3201016
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 5 X 40 UNC HAND TAPS
SKU:
TAP3201018
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 6 X 32 UNC HAND TAPS NO.6
SKU:
TAP3201020
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 8 X 32 UNC HAND TAPS NO.8
SKU:
TAP3201022
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 10 X 24 HSS-M2 UN HAND TAPS, NO.10
SKU:
TAP3201024
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 12 X 24 UNC HAND TAPS NO.12
SKU:
TAP3201026
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1/4″ x 20 UNC HAND TAPS
SKU:
TAP3201028
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 5/16″ x 18′ UNC HAND TAPS
SKU:
TAP3201030
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 3/8″ X 16 UNC HAND TAPS
SKU:
TAP3201032
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 7/16″ X 14 HSS-M2 UNC HAND TAPS
SKU:
TAP3201034
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1/2″ x 13 HSS-M2 UNC HAND TAPS
SKU:
TAP3201036
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 9/16″ X 12 UNC HAND TAPS
SKU:
TAP3201038
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 5/8″ x 11 HSS-M2 UNC HAND TAPS
SKU:
TAP3201040
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 3/4″ X 10 HSS-M2 UNC HAND TAPS
SKU:
TAP3201042
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 7/8″ X 9 HSS-M2 UNC HAND TAPS
SKU:
TAP3201044
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1″ x 8 HSS-M2 UNC HAND TAPS
SKU:
TAP3201046
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1-1/8″ HSS-M2 UNC HAND TAPS (SOMTA)
SKU:
TAP3201054
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1-1/4″ HSS-M2 UNC HAND TAPS
SKU:
TAP3201060
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1-3/8″ HSS-M2 UNC HAND TAPS
SKU:
TAP3201066
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1-5/8″ HSS-M2 UNC HAND TAPS
SKU:
TAP3201070
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1-1/2″ HSS-M2 UNC HAND TAPS
SKU:
TAP3201072
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP SET: 3PC 1-3/4″ HSS-M2 UNC HAND TAPS
SKU:
TAP3201074
* All our taps are manufactured from quality HSS-M2 for durability and extended tool life * These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: UNC 1 X 64 HSS-M2 TAPER HAND TAP
SKU:
TAP3211210
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 2 X 56 HSS-M2 TAPER HAND TAP
SKU:
TAP3211212
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 3 X 48 HSS-M2 TAPER HAND TAP
SKU:
TAP3211214
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 4 X 40 HSS-M2 TAPER HAND TAP
SKU:
TAP3211216
** This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 5 X 40 HSS-M2 TAPER HAND TAP
SKU:
TAP3211218
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 6 X 32 HSS-M2 TAPER HAND TAP
SKU:
TAP3211220
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 8 x 32 HSS-M2 TAPER HAND TAP
SKU:
TAP3211222
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 10 X 24 HSS-M2 TAPER HAND TAP
SKU:
TAP3211224
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 12 X 24 HSS-M2 TAPER HAND TAP
SKU:
TAP3211226
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 3/16″ X 24 HSS-M2 TAPER HAND TAP
SKU:
TAP3211227
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise and uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1/4″ X 20 HSS-M2TAPER HAND TAP
SKU:
TAP3211228
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 5/16″ X 18 HSS-M2 TAPER HAND TAP
SKU:
TAP3211230
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 3/8″ X 16 HSS-M2 TAPER HAND TAP
SKU:
TAP3211232
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 7/16″ 14 HSS-M2 TAPER HAND TAP
SKU:
TAP3211234
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1/2″ X 13 HSS-M2 TAPER HAND TAP
SKU:
TAP3211236
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 9/16″ X 12 HSS-M2 TAPER HAND TAP
SKU:
TAP3211238
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 5/8″ X 11 HSS-M2 TAPER HAND TAP
SKU:
TAP3211240
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 3/4″ X 10 HSS-M2 TAPER HAND TAP
SKU:
TAP3211242
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 7/8″ X 9 HSS-M2 TAPER HAND TAP
SKU:
TAP3211244
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1″ X 8 HSS-M2 TAPER HAND TAP
SKU:
TAP3211246
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1-1/8″ X 7 HSS-M2 TAPER HAND TAP
SKU:
TAP3211254
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1-1/4″ X 7 HSS-M2 TAPER HAND TAP
SKU:
TAP3211260
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1-3/8″ X 6 HSS-M2 TAPER HAND TAP
SKU:
TAP3211266
** This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1-5/8″ X 5 HSS-M2 TAPER HAND TAP
SKU:
TAP3211270
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1-1/2″ X 6 HSS-M2 TAPER HAND TAP
SKU:
TAP3211272
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1-3/4″ X 5 HSS-M2 TAPER HAND TAP
SKU:
TAP3211274
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 2″ X 4-1/2 HSS-M2 TAPER HAND TAP (SOMTA)
SKU:
TAP3211278
* This UNC (Unified National Coarse) Taper hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 8 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 1 X 64 HSS-M2 INTERMEDIATE HAND TAP
SKU:
TAP3221310
* This UNC (Unified National Coarse) Intermediate hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 4 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 2 X 56 HSS-M2 INTERMEDIATE HAND TAP
SKU:
TAP3221312
* This UNC (Unified National Coarse) Intermediate hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 4 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 3 X 48 INTERMEDIATE HAND TAP
SKU:
TAP3221314
* This UNC (Unified National Coarse) Intermediate hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 4 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 4 X 40 INTERMEDIATE HAND TAP
SKU:
TAP3221316
* This UNC (Unified National Coarse) Intermediate hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 4 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread
TAP: UNC 5 X 40 INTERMEDIATE HAND TAP
SKU:
TAP3221318
* This UNC (Unified National Coarse) Intermediate hand tap is manufactured from quality HSS-M2 for durability and long service life
* Taper taps have a 4 thread lead in
All taps are precision ground and thread form is precise anad uniform
* Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread