- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BLUE BAND GUN TAP: M6 X 1.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114276
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M8 X 1.25 SPIRAL POINT (SOMTA)
SKU:
TAP3114278
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M10 x 1.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114280
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M12 x 1.75 SPIRAL POINT (SOMTA)
SKU:
TAP3114282
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M14 X 2.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114284
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M16 X 2.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114286
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M18 X 2.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114288
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M20 X 2.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114290
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M22 X 2.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114292
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND GUN TAP: M24 X 3.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114294
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
GREEN BAND GUN TAP: M3 X 0.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114300
hese Blue band ( Gun taps ) have a thread and flute configuration designed for tough materials such as stainless.titanium alloy cast steel steel resisting and work hardened steels
* Suitable for materials with a hardness up to 350hb, tesile stregth up to 1250N/mm2
* The TiALN coating increases the surface hardness of the tool to around 87 RC
* Manufactured by Somta SA from the finest materials for durability and long service
GREEN BAND GUN TAP: M4 X 0.7 SPIRAL POINT (SOMTA)
SKU:
TAP3114302
** These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M5 X 0.8 SPIRAL POINT (SOMTA)
SKU:
TAP3114304
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M6 X 1.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114306
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M7 X 1.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114307
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M8 X 1.25 SPIRAL POINT (SOMTA)
SKU:
TAP3114308
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M10 X 1.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114310
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M12 X 1.75 SPIRAL POINT (SOMTA)
SKU:
TAP3114312
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M14 X 2.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114314
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M16 X 2.0 SPIRAL POINT (SOMTA)
SKU:
TAP3114316
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M18 X 2.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114318
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M20 X 2.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114320
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
GREEN BAND GUN TAP: M22 X 2.5 SPIRAL POINT (SOMTA)
SKU:
TAP3114322
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
SPIRAL POINT: M20 X 2-5 HSSE-PM GUN TAP ANI–CUT
SKU:
TAP3114450
* These green band series ( Gun taps ) are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
Manufactured by Somta SA from the finest materials for extended work life
YELLOW BAND TAP: M3 X 0.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114510
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M4 X 0.7 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114512
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M5 X 0.8 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114514
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M6 X 1.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114516
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M8 X 1.25 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114518
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M10 X 1.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114520
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M12 X 1.75 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114522
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M14 X 2.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114524
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M16 X 2.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114526
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M18 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114528
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M20 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114530
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M22 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114532
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
YELLOW BAND TAP: M24 X 3.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114534
* Yellow band taps Spiral Flute are manufactured from qualirty HSS-E material for durability and long service life
* Flute and thread are designed for ductile materials such as aluminium magnesium alloy brass plactics zink and copper
* High rake angle improves shear characteristics and reduces build up on the cutting edge
* Ror material hardness up to 200hb and tensile strength to 700N/mm
* Manufactured by Somta SA from the finest materials for extended tool life
RED BAND TAP: M3 X 0.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114540
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M4 X 0.7 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114542
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M5 X 0.8 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114544
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M6 X 1.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114546
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M8 X 1.25 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114548
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M10 X 1.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114550
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M12 X 1.75 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114552
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M14 X 2.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114554
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M16 X 2.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114556
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M18 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114558
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP: M20 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114560
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP M22 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114562
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
RED BAND TAP M24 X 3.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114564
* Theses Red Band Spiral Flute taps have thread and flute configeration designed for high tensile material such as: tool steels heat treatable steels spring steel case hardened steel unalloyed titanium and cold drawn construction steel
* For materials up to 450HB and tensile stregth to 1500n/mm
* Manufactured by Somra SA from the finest materiasl for durability and long service
BLUE BAND TAP: M3 X 0.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114570
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service life
BLUE BAND TAP: M4 X 0.7 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114572
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M5 X 0.8 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114574
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M6 X 1.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114576
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M8 X 1.25 SPRIAL FLUTE (SOMTA)
SKU:
TAP3114578
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M10 X 1.5 SPRIAL FLUTE (SOMTA)
SKU:
TAP3114580
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M12 X 1.75 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114582
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M14 X 2.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114584
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M16 X 2.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114586
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M18 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114588
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M20 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114590
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M22 X 2.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114592
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
BLUE BAND TAP: M24 X 3.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114594
* These Blue Band Spiral Flute taps have a thread and flute configeration designed for tough materials such as stainless steel titanium alloys cast steel steels resisting and work hardened steels
* For materials with hardness up to 350HB tensile strength up to 1250n/mm
* TiAIN coating increases surface of the tool to around 87rc
* Manufactured by Somta SA from the finest materials for durability and long service
GREEN BAND TAP: M3 X 0.5 SPRIAL FLUTE (SOMTA)
SKU:
TAP3114600
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M4 X 0.7 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114602
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M5 X 0.8 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114604
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M6 X 1.0 SPIRAL FLUTE
SKU:
TAP3114606
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M8 X 1.25 SPIRAL FLUTE
SKU:
TAP3114608
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M10 X 1.5 SPIRAL FLUTE
SKU:
TAP3114610
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M12 X 1.75 SPIRAL FLUTE
SKU:
TAP3114612
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M14 X 2.0 SPIRAL FLUTE
SKU:
TAP3114614
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M16 X 2.0 SPIRAL FLUTE
SKU:
TAP3114616
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M18 X 2.5 SPIRAL FLUTE
SKU:
TAP3114618
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M20 X 2.5 SPIRAL FLUTE
SKU:
TAP3114620
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M22 X 2.5 SPIRAL FLUTE
SKU:
TAP3114622
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
GREEN BAND TAP: M24 X 3.0 SPIRAL FLUTE
SKU:
TAP3114624
* These Green Band Spiral Flute series taps are manufactured from quality HSS-E for durability and long service life
* Designed for highly abrasive materials such as carbon steel materials with hardness less than 250 HB and tensile strength of 100M/mm
* This TiALN coating increases surface material hardness to 85RC
* The thread and flute configuration are designed for free cutting
* Manufactured by Somta SA from the finest materials for extened tool life
WHITE BAND TAP: M3 X 0.5 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114630
* These White Band Spiral Flute taps are are made from HSS-E and designed for highly abrasive materials such as cast iron and reinforced plastics
* For materials with hardness up to 300HB and tensile strength up to 1000 N/mm
* TiTAIN coating increases the surface hardness of the tool to around 87 RC with excellent hot hardness working tempreture
* Manufactured by Somta SA from the finest materials for extended service life
WHITE BAND TAP: M4 X 0.7 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114632
* These White Band Spiral Flute taps are are made from HSS-E and designed for highly abrasive materials such as cast iron and reinforced plastics
* For materials with hardness up to 300HB and tensile strength up to 1000 N/mm
* TiTAIN coating increases the surface hardness of the tool to around 87 RC with excellent hot hardness working tempreture
* Manufactured by Somta SA from the finest materials for extended service life
WHITE BAND TAP: M5 X 0.8 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114634
* These White Band Spiral Flute taps are are made from HSS-E and designed for highly abrasive materials such as cast iron and reinforced plastics
* For materials with hardness up to 300HB and tensile strength up to 1000 N/mm
* TiTAIN coating increases the surface hardness of the tool to around 87 RC with excellent hot hardness working tempreture
* Manufactured by Somta SA from the finest materials for extended service life
WHITE BAND TAP: M6 X 1.0 SPIRAL FLUTE (SOMTA)
SKU:
TAP3114636
* These White Band Spiral Flute taps are are made from HSS-E and designed for highly abrasive materials such as cast iron and reinforced plastics
* For materials with hardness up to 300HB and tensile strength up to 1000 N/mm
* TiTAIN coating increases the surface hardness of the tool to around 87 RC with excellent hot hardness working tempreture
* Manufactured by Somta SA from the finest materials for extended service life