- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
GRINDING WHEEL: 355 X 50MM A36
SKU:
GW-443854
GRINDING WHEEL: 450 X 50MM A35 NORTON
SKU:
GW-444100
GRINDING WHEEL: 250 X 38 X 32MM A24 GREY
SKU:
GW-444220
GRINDING WHEEL: 300 X 25 X 127MM SO60 PINK
SKU:
GW-444230
GRINDING WHEEL: 355 X 22 X 152.4MM FA80JV
SKU:
GW-444280
GRINDING WHEEL: 200 X 25 X 15MM A60
SKU:
GW-444410
GRINDING WHEEL: 200 X 25 X 15MM A36
SKU:
GW-444415
HEAD RE-FACING STONE: CG8720 C30JV SOLD PER PIECE
SKU:
GW-448250
OLD FORGE 7132-2 STONE
SKU:
GW-472152
BUSHES: STEPPED FOR G/WHEELS D32.0 X W18.0 x 12.7MM I/D
SKU:
GW-474000
BUSHES: 2″ x 1-1/4″
SKU:
GW-474005
GRAPHITE: BOTTLE PRESSOL
SKU:
LUB410900
CRC: EXOFF WORKSHOP DEGREASER & CLEANER 750ML T/SPRAY
SKU:
LUB424390
* CRC Exoff degreaser & parts cleaner originaly formulated to quickly and safetly grease & oils removal
* Suitable for use in automotive, manufacturing, service workshops and more
* Can be used confidently on all metals, fibreglass, glass, plastics, painted serfaces, laminates and rubber
* Ready to use.. no mixing required
* CRC Exoff is biodegradable, non-toxic, non-hazardous, non-flamble, pH balanced and water soluble
* The advanced formular is powerful but is a non-abrasive, non-corrosive and contains no Solvents
CRC: EXOFF DEGREASER & PARTS CLEANER 750ML T/SPRAY
SKU:
LUB424392
CRC: STUFF OFF – ADHESIVE-PAINT REMOVER 500ML AEROSOL
SKU:
LUB424398
CRC: BRAKLEEN 600G AEROSOL
SKU:
LUB424402
* CRC Brakclean Brake parts cleaner, the original brake parts cleaner, is formulated to quickly and safetly remove brake fluid, grease, oil and other contaminants from brake linings, pads and drums * CRC Brakleen does not contain carbon tetarchloride, silicons, CFC 113 or methyl chloroform * CRC Brakleen is non-staning, non-corrosive and leaves no residue * Brake units can easily be cleaned without disassembling *
CRC: BRAKLEEN 600G BLASTER HIGH PRESSURE SPRAY
SKU:
LUB424404
* CRC Braklean Blaster - Brake parts cleaner, the original brake parts cleaner, is formulated to quickly and safetly remove brake fluid, grease, oil and other contaminants from brake linings, pads and drums * CRC Brakleen does not contain carbon tetarchloride, silicons, CFC 113 or methyl chloroform * CRC Brakleen is non-staning, non-corrosive and leaves no residue * Brake units can easily be cleaned without disassembling * This is a high pressure spray which is designed to remove that stuborn grease and dirt *
CRC: SOFT SEAL 3013 400ML
SKU:
LUB424484
* CRC Spft Seal provides lont term corrosion protection for metal surfaces * It is an aliphatic was-based protective coating that forms a light transparrent film to seal out moisture and corrosive contaminants * It's highly resistant to humidity, salt water & salt spray and will provide protection of equipment subject to heat, humidity, chemicals or corrosive atmospheres * CRC Soft Seal is used on machines surfaces or assemblies subjected to long periods of storage or adverse conditions during shipping * it will never become brittle and will not craze * It's safe to use on plastics, rubber, paint and insulation material * CRC Soft Seal can easily be removed with CRC Brakleen or mineral spirits * It withstands 400 hours of salt spray test *
CRC: AEROCLEAN ENGINE DEGREASER 500ML
SKU:
LUB424500
* CRC Aeroclean degreaser delivers a concentrated jet of cleaning solution that removes oil and grease from dirty parts * It leaves a detergent on the surface which emulsifies the remaining contaminates when flushed off with water * CRC AeroClean is a unique combination of surfactants, detergents and solvents * It is non-corossive, so it can be used safetly clean concrete floors and driveways * CRC AeroClean Degreaser is excellent on all automotive engines and mechanical equipment that is contaminated with grease, oil and grime *
CRC: HYDROFORCE DEGREASER 3.7LTR
SKU:
LUB424502
CRC: XD8 ULTRA H/D DEGREASER 500GM
SKU:
LUB424504
CRC: TREFOLEX CUT/COMPOUND 500ML
SKU:
LUB424505
CRC: PREP IT 400ML
SKU:
LUB425554
CRC: ETCH IT 400ML
SKU:
LUB425556
CRC: BLACK ZINC 460ML
SKU:
LUB425562
* CRC Black Zinc is ideal for outdoor protection of metals against rust * It can be used direclty on bare metalfor touch-up or coating * CRC Black Zinc will outlast standard paint systems * The dried coat is scratch and solvent resistant * Typically CRC Black Zinc will provide 36 months protection against rust in a moderatly corrosive outdoor environment, when a dry film thickness of 65 micron is applied *
CRC: BRIGHT ZINC 400ML
SKU:
LUB425564
* CRC Bright Zinc is ideal for outdoor protection of metals against rust * It is a quick drying, single component, scratch resistant Zinc rich coatiing * CRC Bright Zinc is formulated to givr protection higher than standard paint systems and dries to the colour of new galvanizing * The dried film contains 40% Zinc to provide 60 months protection against rust in a moderately corrosive environment when a film thickness of 65 mircon is applied * Ideal for after weld touch-ups *
CRC: YELLOW ZINC 400ML
SKU:
LUB425568
* CRC Yellow Zinc's unique formula combines superior rust inhibiting properties of zinc with a tough but flexable enamel coating and a yellow satin finish in a recognised safety colour * High levels of anti-corossive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent ashesion to bare metal * CRC Yellow Zinc provides a satin top-coat finish but unlike standart paint systems, resists undercutting and blistering from corrosion by forming an efficitive corrosion barrier * Touch dry in 15-30 minutes, full cure 24 hours *
CRC: ORANGE ZINC 400ML
SKU:
LUB425570
* CRC Orange Zinc's unique formula combines superior rust inhibiting properties of zinc with a tough but flexable enamel coating and an orange gloss finish in a recognised safety colour * High levels of anti-corossive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent ashesion to bare metal * CRC Orange Zinc provides a gloss top-coat finish but unlike standart paint systems, resists undercutting and blistering from corrosion by forming an efficitive corrosion barrier * Touch dry in 15-30 minutes, full cure 24 hours *
CRC: EXHAUST CEMENT BLACK TUBE 145GM
SKU:
LUB425580
CRC: RED RTV GASKET TUBE 85GM B/PACK
SKU:
LUB425584
CRC: GREY RTV GASKET TUBE 85GM B/PACK
SKU:
LUB425588
MANNOL: WINDSCREEN SEALANT 9910 310ML CARTRIDGE
SKU:
LUB426700
* This windscreen sealant is manufactured in Germany by Mannol
* This is a single component, polyurethane adhesive suitable for bonding glass windows to vehicles
* Mannol sealant has ecepttionally strong bonding properties thus eliminatting the need for auxillary fastening aids
Application:
* Heat the cartridge to50-80deg C for 15min
* For large panels we recomend you pre-heat a second cartridge as well
* Make sure the frame is clean and completly dry
* Clean the glass and remove any old sealant
* Apply the sealant to the frame - the sealant will stay manoverable for 15min
* After two hours the sealant will be completly set and the windscreen secure
PERMANET MARKER PEN: CRC BLACK
SKU:
MP-200140
CRC Paint Marker Pen
* Paint Marker Pen uses solvent-based paint formula for durable marking on multiple surfaces in all weather conditions
* It shows excellent coverage and is an ideal product for every toolbox.
* Features & Benefits
« Excellent coverage - Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces.
* Fast-drying - For efficient workflow
« Durable tip with valve action - To prevent an excess of paint flow
« Convenient, medium thickness tip - 4.5mm tip
« Easy and clean application
« Multi-surface use - Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic,
cardboard, some tiles, etc.
« Indoor and outdoor use - Suitable for adverse weather conditions, resistant to UV and water
PERMANET MARKER PEN: CRC WHITE
SKU:
MP-200142
CRC Paint Marker Pen
* Paint Marker Pen uses solvent-based paint formula for durable marking on multiple surfaces in all weather conditions
* It shows excellent coverage and is an ideal product for every toolbox.
* Features & Benefits
« Excellent coverage - Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces.
* Fast-drying - For efficient workflow
« Durable tip with valve action - To prevent an excess of paint flow
« Convenient, medium thickness tip - 4.5mm tip
« Easy and clean application
« Multi-surface use - Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic,
cardboard, some tiles, etc.
« Indoor and outdoor use - Suitable for adverse weather conditions, resistant to UV and water
PERMANET MARKER PEN: CRC RED
SKU:
MP-200144
CRC Paint Marker Pen
* Paint Marker Pen uses solvent-based paint formula for durable marking on multiple surfaces in all weather conditions
* It shows excellent coverage and is an ideal product for every toolbox.
* Features & Benefits
« Excellent coverage - Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces.
* Fast-drying - For efficient workflow
« Durable tip with valve action - To prevent an excess of paint flow
« Convenient, medium thickness tip - 4.5mm tip
« Easy and clean application
« Multi-surface use - Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic,
cardboard, some tiles, etc.
« Indoor and outdoor use - Suitable for adverse weather conditions, resistant to UV and water
PERMANET MARKER PEN: CRC ORANGE
SKU:
MP-200146
CRC Paint Marker Pen
* Paint Marker Pen uses solvent-based paint formula for durable marking on multiple surfaces in all weather conditions
* It shows excellent coverage and is an ideal product for every toolbox.
* Features & Benefits
« Excellent coverage - Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces.
* Fast-drying - For efficient workflow
« Durable tip with valve action - To prevent an excess of paint flow
« Convenient, medium thickness tip - 4.5mm tip
« Easy and clean application
« Multi-surface use - Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic,
cardboard, some tiles, etc.
« Indoor and outdoor use - Suitable for adverse weather conditions, resistant to UV and water
PERMANET MARKER PEN: CRC SILVER
SKU:
MP-200148
CRC Paint Marker Pen
* Paint Marker Pen uses solvent-based paint formula for durable marking on multiple surfaces in all weather conditions
* It shows excellent coverage and is an ideal product for every toolbox.
* Features & Benefits
« Excellent coverage - Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces.
* Fast-drying - For efficient workflow
« Durable tip with valve action - To prevent an excess of paint flow
« Convenient, medium thickness tip - 4.5mm tip
« Easy and clean application
« Multi-surface use - Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic,
cardboard, some tiles, etc.
« Indoor and outdoor use - Suitable for adverse weather conditions, resistant to UV and water
PERMANET MARKER PEN: CRC YELLOW
SKU:
MP-200150
CRC Paint Marker Pen
* Paint Marker Pen uses solvent-based paint formula for durable marking on multiple surfaces in all weather conditions
* It shows excellent coverage and is an ideal product for every toolbox.
* Features & Benefits
« Excellent coverage - Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces.
* Fast-drying - For efficient workflow
« Durable tip with valve action - To prevent an excess of paint flow
« Convenient, medium thickness tip - 4.5mm tip
« Easy and clean application
« Multi-surface use - Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic,
cardboard, some tiles, etc.
« Indoor and outdoor use - Suitable for adverse weather conditions, resistant to UV and water
PERMANET MARKER PEN: LEADERART BLACK
SKU:
MP-200164
MARKING BLUE: 250ML GLOBAL
SKU:
MP-300620
* Dries immediately
* Gives clear view
* Blue surface for precise and accurate marking out
* A New Zealand Product
Marking blue or layout stain (sometimes called Dykem after trademark erosion of a popular brand, or Prussian blue after the blue pigment) is a dye used in metalworking to aid in marking out rough parts for further machining. It is used to stain or paint a metal object with a very thin layer of dye that can be scratched off using a scriber or other sharp instrument to reveal a bright, yet very narrow line in the metal underneath.
HYLOMAR BLUE: UNIVERSAL 250ML HYLOMAR JN61 MED 100GM
SKU:
MP-300624
HYLOMAR BLUE: BRUSH TOP 250ML HYLOMAR JN61 100GM
SKU:
MP-300626
HYLOMAR BLUE: AEROSOL 200ML HYLOMAR JN85
SKU:
MP-300628
* This Hylomar sealant comes in a convenient aerosol can * * The leading non-setting gasket & jointing compound available today* The product can be used to replace a traditional gasket or to “dress” it to significantly improve the performance of the gasket * Non-hardening Wide operating temperature range (-50 to +250ºC) Fuel resistant *
MARKING INK: 250ML ENGINEERS ROCAL
SKU:
MP-300630
* Layout Fluid Blue
* For accurate marking of all metal surfaces
* Resistant to washing off by water and water mix cutting fluids
* Rapid drying blue film for marking bright/machined surfaces or light coloured material
* Sharp clear definition - does not chip or flake
* Easily removed with IPA Solvent cleaner
MOUNTED POINTS: A2 1″ X 1-1/4″ 1/4″ SHANK EA
SKU:
MTP700006
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: 3/4″ X 1-1/8″ EA
SKU:
MTP700012
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A12 11/16″ X 1-1/4″ 1/4″ SHANK EA
SKU:
MTP700018
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A14 11/16″ X 7/8″ 1/4″ SHANK EA
SKU:
MTP700022
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A22 3/4″ X 5/8″ 1/4″ SHANK EA
SKU:
MTP700028
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A26 1/4″ SHANK EA
SKU:
MTP700036
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A32 1″ X 5/8″ 1/4″ SHANK EA
SKU:
MTP700040
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A33 1″ X 1/2″ EA
SKU:
MTP700042
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: A35 1″ X 3/8″ 1/4″ SHANK EA
SKU:
MTP700046
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 6mm *
MOUNTED POINTS: B41 16 X 16 x 3MM 1/8″ SHANK EA
SKU:
MTP700052
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3mm *
MOUNTED POINTS: B42 1/2″ X 3/4″ 1/8″ SHANK EA
SKU:
MTP700054
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3mm *
MOUNTED POINTS: B43 1/4″ X 5/16″ 1/8″ SHANK EA
SKU:
MTP700056
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3mm *
MOUNTED POINTS: B52 3/8″ X 3/4″ 1/8″ SHANK EA
SKU:
MTP700068
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3mm *
MOUNTED POINTS: B112 3/8″ X 1/2″ 1/8″ SHANK EA
SKU:
MTP700136
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3mm *
MOUNTED POINTS: B121 1/2″ X 1/2″ 1/8″ SHANK EA
SKU:
MTP700146
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3mm *
MOUNTED POINTS: W170 EA
SKU:
MTP700312
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W175 EA
SKU:
MTP700316
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W176 EA
SKU:
MTP700320
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W177 EA
SKU:
MTP700324
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W182 EA
SKU:
MTP700336
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W183 1/4″ SHANK EA
SKU:
MTP700340
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W184 1/4″ SHANK EA
SKU:
MTP700344
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W185 1/4″ SHANK EA
SKU:
MTP700348
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W191 1/4″ SHANK EA
SKU:
MTP700356
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *
MOUNTED POINTS: W192 1/4″ SHANK EA
SKU:
MTP700360
* Our standard mounted wheels are generally manufactured in the two most commonly used grits No.60 and No.80 always the larger wheels are of coarser grit and the smaller ones of finer grit * Standard mounted wheels are generally manufactured in vitrified bond * For the special jobs * However they can be supplied in rubber or organic bond * Group A different shapes of medium sizes mounted on spindles of dia 3-6-9mm *