- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAP: BSW 1/8" X 40 3PC SET HAND TAPS
Excl. GST: $36.00
Incl. GST: $41.40
Incl. GST: $41.40
TAP: BSW 3/16" X 24 3PC SET TAP SETS
Excl. GST: $39.00
Incl. GST: $44.85
Incl. GST: $44.85
TAP: BSW 5/32″ X 32 3PC SET HAND TAPS
Excl. GST: $37.00
Incl. GST: $42.55
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world’s first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
| Weight | 0.018 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Related products
TAP: BSW 5/16″ X 18 3PC SET HAND TAPS
SKU:
TAP3283021
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 5/8″ X 11 3PC SET HAND SETS
SKU:
TAP3283040
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1″ X 8 3PC SET HAND TAPS
SKU:
TAP3283060
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1-1/4″ X 7 3PC SET HAND TAPS
SKU:
TAP3283070
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1-1/2″ X 6 3PC SET HAND TAPS
SKU:
TAP3283090
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 3/32″ X 48 TAPER HAND TAP
SKU:
TAP3293106
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 5/32″ X 32 TAPER HAND TAP
SKU:
TAP3293111
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 1/4″ X 20 TAPER HAND TAP
SKU:
TAP3293116
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in