- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAP: BSPT 2″ X 11 INTER HAND TAP
$585.00
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
| Weight | 1.545 kg |
|---|---|
| Dimensions | 0.17 × 0.06 × 0.06 cm |
In stock
Related products
TAP: BSPT 1/8″ X 28 INTER HAND TAP
SKU:
TAP3335012
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 1/4″ X 19 TAPER HAND TAP
SKU:
TAP3335015
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 3/8″ X 19 TAPER HAND TAP
SKU:
TAP3335020
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP; BSPT 1/2″ X 14 BOTTOM HAND TAP
SKU:
TAP3335026
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 7/8″ X 14 TAPER HAND TAP
SKU:
TAP3335033
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 1″ X 11 TAPER HAND TAP
SKU:
TAP3335035
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 1-1/4″ X 11 TAPER HAND TAP
SKU:
TAP3335038
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread
TAP: BSPT 1-1/2″ X 11 TAPER HAND TAP
SKU:
TAP3335040
* Manufactured by Somta SA
* British Standard Pipe Taper = BSPT
* These BSPT Taps are made from quality HSS-M2 for durability and long service life
* Whitworth vee form with 55 degrees
* Taper is 1 to 16
* Every 16.0mm increase in length the diameter increases by 1.0mm
* Widely used for connecting and sealing pipe ends by screwing the external thread to the internal thread