- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANER: TANNER TP-206 600MM 2 SIDER SPIRAL HEADS
$13,600.00
* TANNER TP206 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Power rise & fall
* Cutterblock with antikick-back guards
| Weight | 920 kg |
|---|---|
| Dimensions | 1.04 × 1.36 × 1.39 cm |
Description
| CUTTING WIDTH | 600mm |
|---|---|
| CUTTING HEIGHT | 12 – 200mm |
| MIN LENGTH | 300mm |
| MIN THICKNESS | 6.0mm |
| MAX DEPTH OF CUT | Up 4.0mm – Down 3.0mm |
| TABLE AREA | 965 X 787mm |
| TABLE ROLLERS | 65.0mm |
| FEED SPEEDS | Variable |
| FEED RATE | 8-11m/min |
| CUTTERHEAD SPEED | 6500mm |
| CUTTERHEAD | Spiral Cutterhead |
| TCT TIPS | 15 X 15 X 2.5mm |
| MOTOR X TWO | Top 5.5kw – Bottom 4.0kw |
| WEIGHT NETT/GROSS | 850/920kg |
| VOLUME | 1.966cm |
| PACKING SIZE LX W X H | 1040 x 1260 x 1390mm |
| OVERALL DIMENTIONS | 1080 x 960 x 1382mm |
Shipping & Delivery
Related products
PLANER: TANNER TK-380 15″ M/UNDER 3HP 1PH
SKU:
TKN112124
* This machine comes with a powerful 3hp single phase motor
* Equiped will three knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ 2.2KW 1PH MOTOR UNDER
SKU:
TKN112618
* This Tanner TP-1040F 16" Planer comes with a 2.2kw motor
* Equiped wilh 3 blade cutter head
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Fully enclosed carbnet stand
PLANER: TANNER TH410A 16″ 3HP 1PH INDUSTRIAL S/HEAD
SKU:
TKN112620
* This Tanner 16: Industrial Planer comes with a 3.0hp single phase motor
* Equiped wilh three knife 72.0mm cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Heavy cast iron table
* Top mounted dust chute
PLANER: TANNER TK-201F 20″ 5HP 3PH INDUSTRIAL S/HEAD
SKU:
TKN114238
* The TANNER TK-201F Industrial offers a cutting capacity up to 20"
* Cutting depth of 6.0mm
* Solid cast construction make this machine very rigid
* Heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* This model is fitted with a Spiral Cutterhead
* This head is dynamically balanced to provide smooth running, low noise output and a good finish to the workpiece
TORX COUNTERSINk SCREW: M6 X 15.0MM SPIRAL C/HEAD
SKU:
TKN114335
* TANNER WT-610 Planer with 610mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guards
PLANER: TANNER WT-760 760MM 20HP SPIRAL HEAD
SKU:
TKN114340
* TANNER WT-760 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 20hp main motor
* Power rise & fall
* Cutterblock with antikick-back guards
PLANER: TANNER TP-304 600MM 3 SIDER SPIRAL HEADS
SKU:
TKN114358
* TANNER WT-760 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 20hp main motor
* Power rise & fall
* Cutterblock with antikick-back guards
PLANER: TANNER FOUR SIDER 230MM 10HP
SKU:
TKN115000
* TANNER MS-423 4 side Planer
* Industrial quality machine with table surface of high ductile cast iron
* Cutterhead guard is manufactured from HSS, heat treated and hard chromed
* Numerical control panel allows sizing adjustment of cutters for convenience and rapit settings
* Fitted with overload protection - cutter will stop within 3 seconds !
* Feeding roller is combined with pneumatic and gearbox feed system
* Feeding can be opperated in jog mode for accurate settings
* The table surface adops a newly designed pneumatic lubrication for feeding all types of timber