- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANER: TANNER D52 520MM 5.5KW 3PH SPIRAL CUTTER HEAD
$0.00
* TANNER D52 Planer with 520mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guards
| Weight | 658 kg |
|---|---|
| Dimensions | 1.185 × 1.11 × 1.295 cm |
Description
| CUTTING WIDTH | 520mm |
|---|---|
| CUTTING HEIGHT | 300mm |
| MIN LENGTH | 280mm |
| MIN THICKNESS | 15.0mm |
| FEED SPEEDS | 0-10M/min |
| FEED RATE | Viarable |
| CUTTERHEAD SPEED | 5000mm |
| CUTTER HEAD DIAMETER | 90.0mm |
| CUTTERHEAD | Spiral Head 15 x 15 x 2.5mm |
| TCT TIPS | |
| MOTOR | 5.5Kw 3Phase |
| WEIGHT NETT/GROSS | 640/658kg |
| VOLUME | 1.7034cm |
| PACKING SIZE L X W X H | 1185 x 1110 x 1295mm |
Shipping & Delivery
Related products
PLANER: 12″ MB103 1PH
SKU:
TKN112120
* This machine comes with a powerful 3hp single phase motor
* Equiped will Four knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ 2.5HP 1PH MOTOR UNDER
SKU:
TKN112610
* This Tanner 16: Planer comes with a 2.5hp single phase motor
* Equiped wilh three knife 72.0mm cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ TP-104H 4KW 3PH SPIRAL HEAD
SKU:
TKN112614
* This Tanner TP-104H 16" Planer comes with a 4.0kw motor
* Equiped wilh a spiral cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbnet stand
* Heavy duty machine
PLANER: TANNER 16″ 2.2KW 1PH MOTOR UNDER
SKU:
TKN112618
* This Tanner TP-1040F 16" Planer comes with a 2.2kw motor
* Equiped wilh 3 blade cutter head
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Fully enclosed carbnet stand
PLANER: TANNER CT-508 20″ 3HP 1 PHASE
SKU:
TKN114210
* The TANNER CT-508 20 Planer provides a cutting capacity of up to 20" wide
* Maximum planing thickness is 6.0mm
* With rollers situated on the top of the machine allows stock to pass over the machine
* Using the in-feed and out-feed roller support operation is easy and convenient
* An oil-bath lubricated gear box provides very smooth feeding
* Lifting lever is provided to allow for easy maneuverability
* The unit is the result of quality engineering which meets with CSA standards
* All components precision machined for complete interchangeability and added value
* A rugged machine which has been proven in the field for many years
PLANER: TANNER WT-610 610MM 10HP 3PH SPIRAL HEAD
SKU:
TKN114330
* TANNER WT-610 Planer with 610mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guards
PLANER: TANNER TP-106J 610MM 5.5KW 3PH SPIRAL CUTTER HEAD
SKU:
TKN114338
* TANNER TP-610 Planer with 610mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guard
* This model comes with table power rise and fall
PLANER: TANNER TP-304 600MM 3 SIDER SPIRAL HEADS
SKU:
TKN114358
* TANNER WT-760 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 20hp main motor
* Power rise & fall
* Cutterblock with antikick-back guards