- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANER: TANNER 16″ 2.2KW 1PH MOTOR UNDER
$3,300.00
* This Tanner TP-1040F 16″ Planer comes with a 2.2kw motor
* Equiped wilh 3 blade cutter head
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Fully enclosed carbnet stand
| Weight | 240 kg |
|---|---|
| Dimensions | 0.83 × 0.62 × 1.165 cm |
In stock
Description
| DESCRIPTION | TP-1040F Planer |
|---|---|
| MAX CUTTING WIDTH | 380mm |
| MAX CUTTING HEIGHT | 200mm |
| MIN WORKING LENGTH | 160mm |
| MAX CUTTING DEPTH | 5.0mm |
| FEED SPEEDS | 9.1m/sec |
| TABLE SIZE | 453 x 406mm |
| CUTTER HEAD | 4pc Blades – 400 x 25 x 3.0mm |
| CUTTER HEAD SPEED | 4500rpm |
| MOTOR | 2.2kw 1 Phase 230v |
| INFEED ROOLS | Serrated Steel |
| WEIGHT NETT/GROSS | 212/240kg |
| VOLUME | 0.5995cm |
| PACKING SIZE L X W X H | 830 X 620 X 1165mm |
Shipping & Delivery
Related products
PLANER: TANNER TK-380 15″ M/UNDER 3HP 1PH
SKU:
TKN112124
* This machine comes with a powerful 3hp single phase motor
* Equiped will three knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ TP-104H 4KW 3PH SPIRAL HEAD
SKU:
TKN112614
* This Tanner TP-104H 16" Planer comes with a 4.0kw motor
* Equiped wilh a spiral cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbnet stand
* Heavy duty machine
PLANER: TANNER CT-508 20″ 5HP 3PH
SKU:
TKN114234
* The TANNER TPC-508 offers a cutting capacity up to 20 wide and a depth of 6.0mm
* Solid cast construction make this machine very rigid
* Four heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Cutterhead is dynamically balanced to provide smooth running and a good finish
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* A proven perfomer over many years of development
PLANER: TANNER TK-201F 20″ 5HP 3PH INDUSTRIAL S/HEAD
SKU:
TKN114238
* The TANNER TK-201F Industrial offers a cutting capacity up to 20"
* Cutting depth of 6.0mm
* Solid cast construction make this machine very rigid
* Heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* This model is fitted with a Spiral Cutterhead
* This head is dynamically balanced to provide smooth running, low noise output and a good finish to the workpiece
PLANER: TANNER WT-610 610MM 10HP 3PH SPIRAL C/HEAD
SKU:
TKN114330
* TANNER WT-610 Planer with 610mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guards
PLANER: TANNER WT-760 760MM 20HP SPIRAL HEAD
SKU:
TKN114340
* TANNER WT-760 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 20hp main motor
* Power rise & fall
* Cutterblock with antikick-back guards
PLANER: TANNER TP-206 600MM 2 SIDER SPIRAL HEADS
SKU:
TKN114354
* TANNER TP206 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Power rise & fall
* Cutterblock with antikick-back guards
PLANER: TANNER TP-304 600MM 3 SIDER SPIRAL HEADS
SKU:
TKN114358
* TANNER WT-760 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 20hp main motor
* Power rise & fall
* Cutterblock with antikick-back guards