- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
MILL/DRILL: ZX-40APC COLUMN TYPE WEISS
$4,300.00
* The ZX-40APC is a robust column type mill driill.
* Head can be rotated 360° and can be tilted to 45°.
* Equipped with power downfeed on the quill and a MT4 spindle taper.
* The compound table makes this a very verisatile machine.
* Coolant system with reservoir built into the base of the machine.
| Weight | 370 kg |
|---|---|
| Dimensions | 0.76 × 0.76 × 1.09 cm |
Description
| Table Size (mm) | 585 x 190 |
|---|---|
| Drilling Capacity (mm) | 40 |
| Travel X-axis (mm) | 370 |
| Travel Y-axis (mm) | 180 |
| Swing (mm) | 520 |
| Max Nose to Table (mm) | 745 |
| Spindle Taper | MT4 |
| Quill Stroke (mm) | 120 |
| Quill Diameter (mm) | 80 |
| Column Diameter (mm) | 115 |
| Speeds (no.) | 6 |
| Speed Range (rpm) | 50 – 1250 |
| Table Slot (mm) | 12 |
| Motor (kW) | 1.1 |
| Voltage (V) | 230 |
| Weight Nett / Gross (kg) | 320 / 370 |
| Volume (m³) | 0.6296 |
| Packing Size L x W x H (mm) | 760 x 760 x 1900 |
Shipping & Delivery
Related products
MILL/DRILL: TPC-25 1HP 1PH WEISS
SKU:
MD-330258
MILL/DRILL: WMD-45AV VARIABLE SPEED DRO P/FEED WEISS
SKU:
MD-330285W
* Precision mills, quiet & smooth running, yet solid & stable.
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Heads can be tilted ±90°.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Powerfeed on X-axis.
* Control box on swivel arm.
* Electrical box on back of column.
* Powered rise & fall of the milling head.
* Fitted with DRO
MILL/DRILL: GH-45AP DRO P/FEED CAST BASE P/QUILL WEISS
SKU:
MD-330287
* This Mill/Drill has a 800x240mm table which is hardened and precision ground
* Head tilts 90 Deg` left & right with graduations for accurate settings
* Spindle is suported with Heavy Duty taper roller bearing for long service life
* Micro downfeed with positive spindle lock
* Ridgid verticle column for chatter free milling
* Adjustable table gibs
* Solid cast stand for stability
* Fittited with coolant system
* Comes with 3 axis DRO including quill travel
* this model has power freed to quill
MILL/DRILL: WMD-20L V/SPEED WEISS
SKU:
MD-330400
* Compact milling & drilling machine with variable speed control.
* Brushless motor provides more power & less maintenance.
* Motor control board manufactured in the U.S.A.
* Digital displays for both speed & depth.
* Geared head for greater torque & quiet running.
* Head is raised & lowered on the dovetail column using a handwheel.
* Spindle is supported by high speed taper roller bearings.
* Fine down feed adjustment.
* Heads can be tilted ±90°.
* These models are ideal for hobbyists and small workshops.
MILL/DRILL: WM-25VL V/SPEED BRUSHLESS MTR P/FEED WEISS
SKU:
MD-330410
* The WMD25L is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop
* Fitted with table power feed
MILL DRILL: WMD-30L 1.5kW WEISS
SKU:
MD-330418
* The WMD30L is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: WMD-30LV 1.1KW WITH POWERFEED WEISS
SKU:
MD-330420
* The WMD30LV is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* Powerfeed fitted on the X axis.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: ZX-32G/A 1HP 1PH
SKU:
MD-330428
* The ZX32G is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.