- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: L22 GM6256 560 X 1500 X 80MM BORE
$23,800.00
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
| Weight | 2720 kg |
|---|---|
| Dimensions | 2.9 × 1.1 × 1.7 cm |
Description
| Swing Over Bed (mm) | 560 |
|---|---|
| Swing Over X-slide (mm) | 355 |
| Swing Over Gap (mm) | 785 |
| Between Centres (mm) | 1,500 |
| Bed Width (mm) | 350 |
| Spindle Nose | D1-8 |
| Speeds (no.) | 12 |
| Speed Range (rpm) | 25 – 1,500 |
| Spindle Bore (mm) | 80 Ø |
| Spindle Taper | MT7 |
| Metric Threading (M) | 47 Kinds 0.2 – 14 |
| Imperial Threading (tpi) | 60 Kinds 2 – 112 |
| Tailstock Taper | MT5 |
| Tool Height (mm) | 20 |
| Motor (kW) | 7.5 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 2,290 / 2,410 |
| Volume (m³) | 6 |
| Packing Size L x W x H (mm) | 2,900 x 1,200 x 1,750 |
Shipping & Delivery
Related products
LATHE: GOSAN 2080AV 510 X 2000MM VARIABLE SPEED
SKU:
L--109238
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: JESSEY GENERAL 660 X 3000 (TAIWAN)
SKU:
L--110170
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Fitted with magnetic brake, and Matrix clutch system.
* Both axes have rapid power feed fitted for quick positioning.
* Rigid tailstock with two speed quill plus rack and handle positioning.
* Front draw chip tray for easy cleaning.
* One-shot oil pump on saddle provides excellent slideways central lubrication.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Made in Taiwan.
LATHE: GL-3040 3000 X 4000M STANDING LATHE
SKU:
L--110180
* This heavy duty standing lathe has a free standing headstock and tailstock.
* Suitable for large workpiecees and can be adjusted to different lengths between centers.
* Has a 3.5m swing over bed.
* Comprised of three main independent components: headstock, apron, and tailstock.
* Features rapid traverse on all axes.
* Supplied with 4 jaw 1600mm chuck.
* 3 Jaw chuck and faceplate are available to suit.
* Steadies are available to suit customers requirements.
LATHE: L22 GM6256 560 X 1000 X 80MM BORE
SKU:
L--120028
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
LATHE: L-6266A 660 X 3000 X 105MM BORE
SKU:
L--120425
* This lathe sits on a heavy cast iron base with hardened & ground headstock headstock gears and bedway.
* 105mm spinlde bore allows for large diameter shafts to pass through the headstock.
* Very heavy machine and rigid under all conditions.
* Rapid feeds and left hand wheel.
* Huge range of thread cutting available.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Coming from one of the best lathe factories in China, this machine will produce high quality components.
LATHE: D-660 660 X 3000 x 105MM BORE Optiturn
SKU:
L--120426
* This lathe sits on a heavy cast iron base with hardened & ground headstock headstock gears and bedway.
* 105mm spinlde bore allows for large diameter shafts to pass through the headstock.
* Very heavy machine and rigid under all conditions.
* Rapid feeds and left hand wheel.
* Huge range of thread cutting available.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Coming from one of the best lathe factories in China, this machine will produce high quality components.
LATHE: PA-35 X 3000 PROKING (TAIWAN)
SKU:
L--120437
* This ProKing Taiwanese lathe comes in many different configurations.
* Bed is one piece casting.
* All ways are hardened and precision ground.
* Alloy steel spindle with roller bearings.
* All gears and shafts are herdened and ground.
* Electromagnetic spindle brake.
* Fitted with 6 way rapid traverse and power feed to topslide.
* Totally enclosed universal inch/metric gearbox.
* Pressurised one shot lubrication system for cross slide and carriage.
LATHE: C62680EX 800 X 3000 X 105MM BORE
SKU:
L--120456
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 15kw motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.