- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: CWA61100 1000 X 8000 X 105MM BORE
Excl. GST: $145,000.00
Incl. GST: $166,750.00
Incl. GST: $166,750.00
TAPE MEASURE: 8M X 25MM XCEL
Excl. GST: $12.00
Incl. GST: $13.80
Incl. GST: $13.80
LATHE: L-6266A 660 X 3000 X 105MM BORE
Excl. GST: $38,600.00
Incl. GST: $44,390.00
* This lathe sits on a heavy cast iron base with hardened & ground headstock headstock gears and bedway.
* 105mm spinlde bore allows for large diameter shafts to pass through the headstock.
* Very heavy machine and rigid under all conditions.
* Rapid feeds and left hand wheel.
* Huge range of thread cutting available.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Coming from one of the best lathe factories in China, this machine will produce high quality components.
| Weight | 4310 kg |
|---|---|
| Dimensions | 4.77 × 1.15 × 1.84 cm |
Description
| Swing Over Bed (mm) | 660 |
|---|---|
| Swing Over X-slide (mm) | 440 |
| Swing Over Gap (mm) | 900 |
| Between Centres (mm) | 3,000 |
| Bed Width (mm) | 400 |
| Spindle Nose | D1-8 |
| Speeds (no.) | 16 |
| Speed Range (rpm) | 26 – 1,600 |
| Spindle Bore (mm) | 105 |
| Spindle Taper | MT5 |
| Metric Threading (M) | 0.45 – 120 |
| Imperial Threading (tpi) | 7/16 – 80 |
| Tailstock Taper | MT5 |
| Tool Height (mm) | 25 |
| Motor (kW) | 7.5 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 3,710 / 4,310 |
| Volume | 10.0933cm |
| Packing Size L x W x H (mm) | 4,800 x 1,400 x 1,900 |
Shipping & Delivery
Related products
LATHE: GOSAN 2060AV 510 X 1500MMVARIABLE SPEED
SKU:
L--109234
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GOSAN 2080A 510 X 2000MM 10HP
SKU:
L--109236
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GOSAN 2080AV 510 X 2000MM VARIABLE SPEED
SKU:
L--109238
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GL-3040 3000 X 4000M STANDING LATHE
SKU:
L--110180
* This heavy duty standing lathe has a free standing headstock and tailstock.
* Suitable for large workpiecees and can be adjusted to different lengths between centers.
* Has a 3.5m swing over bed.
* Comprised of three main independent components: headstock, apron, and tailstock.
* Features rapid traverse on all axes.
* Supplied with 4 jaw 1600mm chuck.
* 3 Jaw chuck and faceplate are available to suit.
* Steadies are available to suit customers requirements.
LATHE: GL-3040 CHUCK 1600MM WITH 4PC JAWS
SKU:
L--110181
LATHE: GL-3040 OPEN SUPPORT STANDING LATHE
SKU:
L--110182
LATHE: CA6250B 500 X 1500 X 80MM BORE
SKU:
L--110215
* The CA6250B is a heavy duty lathe with 500mm swing and 80mm spindle bore.
* All headstock gears are hardened and pricision ground for smooth running and long life durability.
* Bed is also induction hardened and ground for durability and log service life.
* Fitted with apron mounted button for rapid lonitudional travel.
* This machine is also fitted with taper turning attachment.
* Two axis digital readout.
* Quick change tool post with 4 holders.
LATHE: C6266C 660 X 2000 X 105MM BORE
SKU:
L--120441
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 9kW motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.