- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: GL-6240F 400 X 1000 X 51MM BORE, 1 PHASE
$13,900.00
* This GL-6240F lathe comes with hardened and ground bedways.
* Headstock gears are hardened and ground to offer a long service life.
* Precision headstock taper rolling bearings on the spindle.
* Integrated cast iron floor stand.
* Three points support for spindle.
* 16 Speed changes 45-1800rpm
* Very rigid machine
* Emergency stop buttons on both sides of the machine for added safety !
| Weight | 800 kg |
|---|---|
| Dimensions | 1.92 × 0.76 × 1.45 cm |
Description
| DESCRIPTION | Centre Lathe |
|---|---|
| MODEL | GL-6240F |
| SWING OVER BED | 400mm |
| SWING OVER GAP | 546mm |
| SWING OVER X SLIDE | 220mm |
| DISTANCE BETWEEN CENTRES | 1000mm |
| BED WIDTH | 206mm |
| SPINDLE BORE TAPER | MT6 |
| SPINDLE NOSE | D1-5 |
| SPINDLE SPEEDS | 16 Steps |
| SPEED RANGE | 45 – 1800rpm |
| LONGITUDINAL FEEDS | 0.043-0 653mm/r |
| CROSS FEEDS | 0.015-0 220mm/r |
| TAILSTOCK TAPER | MT3 |
| MOTOR | 2.2kw |
| VOLTAGE | 230v Single phase |
| WEIGHT NETT/GROSS | 800kg |
| VOLUME | 2.1158cm |
| Packing Size L x W x H (mm) |
Shipping & Delivery
Related products
LATHE: GOSAN 1740A 434 X 1000MM 7.5HP
SKU:
L--109170
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GOSAN 1760A 434 X 1500MM 7.5 HP
SKU:
L--109180
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: JESSEY MAJOR 510 X 1000MM (TAIWAN)
SKU:
L--110160
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* 'One shot' oil pump on saddle provides excellent slideways central lubrication.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Two grouped change levers for 16 spindle speeds.
* Moveable front chip tray allows easy chip cleaning.
* Adjustable apron clutch for bi-directional feed pressure adjustment.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Made in Taiwan.
LATHE: JESSEY MAJOR 460 X 2000MM (TAIWAN)
SKU:
L--110165
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* 'One shot' oil pump on saddle provides excellent slideways central lubrication.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Two grouped change levers for 16 spindle speeds.
* Moveable front chip tray allows easy chip cleaning.
* Adjustable apron clutch for bi-directional feed pressure adjustment.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Made in Taiwan.
LATHE: GL-1860 460 X 1500MM 80MM BORE, 3 PHASE
SKU:
L--110334
* Large 80mm spindle bore makes this machine a very desirable machine for any workshop.
* Bed is hardened and ground offering a long wear resistant lifespan.
* All headstock gears are hardened and ground.
* No changing of gears required to cut metric or imperial threads.
* Auto stop mechanisim for longditudinal travel which can be set to the desired length.
* Full cast bed make this machine very rigid.
LATHE: 360 X 1000MM 40.0MM BORE 1PH
SKU:
L--120002
* One piece casting base make this lathe very sturdy under all turning conditions.
* Hardened precision ground gears in headstock.
* Induction hardened precision ground V way bedways.
* D1-4 spindle supported by high quality tapered roller bearings.
* Large 40mm spindle bore for bar work.
* Fitted with quickchange toolpost and digital readout.
LATHE: GL-6236K 360 x 1000 X 51MM BORE 1 PHASE
SKU:
L--120005
* Hardened precision ground gears in headstock.
* Induction hardened precision ground V way bedways.
* D1-5 spindle supported by high quality tapered roller bearings.
* Large 51mm spindle bore for bar work.
* Gap bed for larger diameter work pieces.
* Independent leadscrew & feed rod.
* Automatic feed & threading.
* Fitted with digital readout, quickchange toolpost.
LATHE: L22 GM6256 560 X 2000 X 103MM BORE
SKU:
L--120033
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Large 103mm spindle bore.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.