- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
SEAL KIT: SUIT 160 TON FLOOR HPM-160A
Excl. GST: $335.00
Incl. GST: $385.25
Incl. GST: $385.25
HYDRAULIC PRESS: 50 TON FLOOR SIDE & FOOT PUMP (RED) dont sell
Excl. GST: $1,595.00
Incl. GST: $1,834.25
Incl. GST: $1,834.25
HYDRAULIC TYRE PRESS: 200 TON X 1500MM
Excl. GST: $35,500.00
Incl. GST: $40,825.00
* Designed for removing large tyres from rims.
* Welded heavy steel frame.
* Double speed operation to improve efficiency.
* Maximum width between frames is 1500mm.
* Powered by a powerful 5.5kw 3 phase motor.
| Weight | 4400 kg |
|---|---|
| Dimensions | 2.9 × 1.05 × 2.48 cm |
Description
| DESCRIPTION | Hydraulic Tyre Press |
|---|---|
| TYPE | Motorised |
| CAPACITY | 200 Ton |
| WIDTH | 800mm |
| HEIGHT O/A | 2600mm |
| STROKE | 600mm |
| BETWEEN FRAMES | 1500mm |
| OPEN HEIGHT | 1200mm |
| WORKING SPEED | 2.0 mm/sec |
| DOWN SPEED | 7.3 mm/sec |
| RETURN SPEED | 10 mm/sec |
| MOTOR POWER | 5.5kw |
| VOLTAGE | 415v |
| MAX HTDRAULIC PRESSURE | 32.5 Mpa |
| WEIGHT NETT/GROSS | 4.300/4.400kg |
| VOLUME | 7.5516 |
| Hydraulic Power Pack – Size | L1000 x W900 x H1250mm |
| Weight Nett/Gross | |
| Volume | 1.125 |
Shipping & Delivery
Related products
PRESSURE GAUGE: HYDRAULIC PRESS 20 TON
SKU:
HP-300146
HYDRAULIC PRESS: 30 TON FLOOR HP-30C (Manual)
SKU:
HP-300147
HYDRAULIC PRESS: 30 TON SUPER (Manual)
SKU:
HP-300149
HYDRAULIC PRESS: 50 TON FLOOR MPA-50 AIR ASSIST
SKU:
HP-300152
* Robust steel frame and heavy duty table.
* Foot operated pneumatic pump for quick setting up time.
* Manual hand pump for setting the pressure on the workpiece.
* Dual action pump for higher efficiency.
* Pressure gauge mounted in top of frame.
* Overload to 150%.
* Ram can be adjusted left and right on heavy duty ball bearings.
* Adjustable table height using side mounted winch.
* Ideal workshop press for repetitive use.
HYDRAULIC PRESS: 55 TON Hyd W/shop Press HPM-55
SKU:
HP-300159
HYDRAULIC PRESS: 75 TON AIR HYD PRESS (Manual)
SKU:
HP-300163
SEAL KIT: SUIT 75T HYDRAULIC PRESS
SKU:
HP-300164
HYDRAULIC FLANGE SPREADER: 5 TON 19-28 STUD CAPACITY
SKU:
HP-300400