- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
END MILL: 6.0MM HSS-Co8 4FT STD LENGTH HARTINGEN
$15.50
* This End Mill is a Standard, General Purpose with 4 Flutes
* Single End, Square End Style
* Center Cutting Type
* Right Hand Cut HSS-Co8 (8% Carbide) Bright Finish
* Rhc 30 Deg, Rhh 30 Deg
* For Plunge Cutting
* Peripheral Milling
* Deep Slotting and Pocketing at Higher Feed and Speeds
| Weight | 0.18 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Description
| DESCRIPTION | End Mill – Centre Cut |
|---|---|
| MATERIAL | HSS-Co8 8% Cobalt |
| DIAMETER | 6.0mm |
| FLUTES | 4 Flute |
| FLUTE LENGTH | 13.0mm |
| FLUTE HARDNESS | HRC66-68 |
| LENGTH O/A | 57.0mm |
| SHANK DIAMETER | 6.0mm |
| SHANK TYPE | Flatted Shank |
| FINISH | Ground Bright |
| DIN STANDARD | 844 |
| WEIGHT NETT/GROSS | 0.180kg |
| VOLUME | 0.0001cm |
Shipping & Delivery
Related products
END MILL: HSS 11.0MM STD THR/SHANK GSE
SKU:
EM-700432
END MILL: HSS 15.0MM STD THR/SHANK GSE
SKU:
EM-700448
END MILL: HSS 16.0MM STD THR/SHANK GSE
SKU:
EM-700452
END MILL: HSS 17.0MM STD THR/SHANK GSE
SKU:
EM-700456
END MILL: 3.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210200
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 6.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210206
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 7.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210207
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 8.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210208
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *