- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
Back in Stock Soon
END MILL: 10.0MM FAST CARBIDE 3 FLUTE ALU(SOMTA)
$84.62
* These cylindrical shank three flute End Mills are designed for aluminum cutting
* Manufactured from Sub-micron carbide grade of European origin *
| Weight | 0.07 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
Description
| DESCRIPTION | End Mill – Aluminum |
|---|---|
| DIAMETER | 10.0mm |
| MATERIAL | Carbide |
| FLUTES | 3 Flute |
| LENGTH O/A | 63.0mm |
| FLUTE LENGTH | 19.0mm |
| SHANK DIAMETER | 8.0mm |
| SHANK TYPE | Cylindrical |
| FINISH | Uncoated |
| WEIGHT NETT/GROSS | 0.070kg |
| VOLUME | 0.0001cm |
| FEEDS & SPEEDS | Speed 11000 Feed 4000 |
| CUTS | Roughing & Finishing at same time at high speed with heavy cuts |
Shipping & Delivery
Related products
END MILL: HSS 9.0MM STD THR/SHANK ETS GSE
SKU:
EM-700424
END MILL: HSS 11.0MM STD THR/SHANK GSE
SKU:
EM-700432
END MILL: HSS 16.0MM STD THR/SHANK GSE
SKU:
EM-700452
END MILL: HSS 18.0MM STD THR/SHANK GSE
SKU:
EM-700460
END MILL: 5.0MMHSS-Co8 4 FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210205
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 6.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210206
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 8.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210208
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 14.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210214
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *