- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: JM430+AZ75DR+D430
$32,343.00
| Weight | 1400 kg |
|---|---|
| Dimensions | 1.455 × 1.9 × 2.455 cm |
SKU:
EDM100332
Category: EDM MACHINES
Description
| CAPACITY OF TANK | 340 Litres |
|---|---|
| WORK TABLE | 650 x 400mm |
| TRAVEL X | 400mm |
| TRAVEL Y | 300mm |
| SPINDLE HEADSTOCK TRAVEL | 230 – 630mm |
| MAX ELECTRODE WEIGHT | 75kg |
| MAX TABLE WEIGHT | 900kg |
| MAX WORKTABLE CLEARANCE | 900mm |
| MAX OUTPUT | 75A |
| VOLTAGE | 7.0kva |
| MAX PROCESSING SPEED | mm3/min |
| WEIGHT NETT/GROSS | 1400kg |
| VOLUME | 6.7868cm |
Shipping & Delivery
Related products
EDM: TR100 TAP REMOVER
SKU:
EDM100030
$7,200.00
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: CNC DNC42+DN40 SUPERDRILL
SKU:
EDM100140
$0.00
* The Joemars DNC42 is specially designed for drilling hard materials such as hardened steel aaloys & tungston carbide in ranges of 0.2mm-3.0 mm
* This CNC EDM drill is a production drilling machine controlled by a Heidenhain controller
*The newly developed sparking cercuits are special to the DNC42 EDM super drills to enhance machine speed excellent flushing lower wear & higher accuracy*
EDM: JM325D SUPER DRILL
SKU:
EDM100150
$33,200.00
* The Joemars JM325D is specially designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM325D & JM528D EDM Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM528D SUPER DRILL
SKU:
EDM100160
$42,000.00
* The Joemars JM528D is specialy designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM235D &JM528D Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM325DZ SUPER DRILL
SKU:
EDM100170
$39,850.00
* The Joemars JM325DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn operation and be confident in only a few hours
* Includes 3 axis DRo system: X Y axis use linear scale Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival Arcing Low Dielectric level For safety and on short electrode
* Anti hitting system for electrode
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc
EDM: JM528DZ SUPER DRILL
SKU:
EDM100180
$46,300.00
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc.
EDM: CNC WT455S WIRE CUT
SKU:
EDM100230
$0.00
EDM: JM430+AZ50R+D430
SKU:
EDM100330
$31,135.00
