- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: JM32NZ COMPACT
Excl. GST: $58,000.00
Incl. GST: $66,700.00
Incl. GST: $66,700.00
EDM: JM430+AZ75DR+D430
Excl. GST: $32,343.00
Incl. GST: $37,194.45
Incl. GST: $37,194.45
EDM: JM430+AZ50R+D430
Excl. GST: $31,135.00
Incl. GST: $35,805.25
* The Joemars JM430 + AZ50R + D430 pack is specially designed for drilling hard materials such as hardened steels, alloys and tungstan carbide in ranges of 0.2mm-3.0mm
* Featurs Fuzzy logic control, 75amps, DRO
| Weight | 1400 kg |
|---|---|
| Dimensions | 1.52 × 1.45 × 2.25 cm |
Description
| CAPACITY OF TANK | 340 Ltrs |
|---|---|
| WORK TABLE | 650 X 400mm |
| TRAVEL X | 400mm |
| TRAVEL Y | 300mm |
| SPINDLE HEADSTOCK TRAVEL | 200mm |
| MAX ELECTRODE WEIGHT | 75 Kgs |
| MAX TABLE WEIGHT | 900kgs |
| MAX WORKTABLE CLEARANCE | |
| MAX OUTPUT | 75amps |
| VOLTAGE | 380v 3 Phase |
| MAX PROCESSING SPEED | |
| WEIGHT NETT/GROSS | 1400 / 1400kg |
| VOLUME | 4.959cm |
| PACKING SIZE L X W X H | 1520 X 1450 X 2250mm |
Shipping & Delivery
Related products
EDM: TR100 TAP REMOVER
SKU:
EDM100030
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: JM528D SUPER DRILL
SKU:
EDM100160
* The Joemars JM528D is specialy designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM235D &JM528D Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: CNC DNC35 DRILLING
SKU:
EDM100200
* The Joemars CNC DNC35 Drilling EDM machine comes with arm type movable control panel design for operator comfort
* Stainless steel work table ensures stability
* Half submerged work table increases the performance of machining
* The Heidenhain TNC310 controller holds 100 sets of machining memories
* 6 Kinds of machining parameters
* Five kinds of alarm indicators
* RS-232-C/V.24 interface
* Plus many other fuctions *
EDM: CNC WT455S WIRE CUT
SKU:
EDM100230
EDM: CNC WT655 WIRE CUT
SKU:
EDM100240
EDM: JM32NZ COMPACT
SKU:
EDM100310
EDM: JM430+AZ75DR+D430
SKU:
EDM100332
JM430+AZ50R+D430: AUTOMATIC FIRE EXTINGUISHER
SKU:
EDM100360