- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: JM528D SUPER DRILL
Excl. GST: $42,000.00
Incl. GST: $48,300.00
Incl. GST: $48,300.00
EDM: CNC WT455 WIRE CUT
Excl. GST: $0.00
Incl. GST: $0.00
Incl. GST: $0.00
EDM: JM325DZ SUPER DRILL
Excl. GST: $39,850.00
Incl. GST: $45,827.50
* The Joemars JM325DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate – new operator can learn operation and be confident in only a few hours
* Includes 3 axis DRo system: X Y axis use linear scale Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival Arcing Low Dielectric level For safety and on short electrode
* Anti hitting system for electrode
* Using ‘MOSFET’ sparking circuits suitable for tungsten carbide hardened steel etc
| Weight | 620 kg |
|---|
Description
| CAPACITY OF TANK | 10 Litres X 2Pc |
|---|---|
| WORK TABLE | 460 X 210mm |
| TRAVEL X | 330mm |
| TRAVEL Y | 210mm |
| SPINDLE HEADSTOCK TRAVEL | 345mm |
| MAX ELECTRODE WEIGHT | |
| MAX TABLE WEIGHT | 100kg |
| MAX WORKTABLE CLEARANCE | 250mm |
| MAX OUTPUT | |
| VOLTAGE | 380v 3 Phase |
| MAX PROCESSING SPEED | |
| WEIGHT NETT/GROSS | 620 / 620kg |
| VOLUME |
Shipping & Delivery
Related products
EDM: CNC DNC42+DN40 SUPERDRILL
SKU:
EDM100140
* The Joemars DNC42 is specially designed for drilling hard materials such as hardened steel aaloys & tungston carbide in ranges of 0.2mm-3.0 mm
* This CNC EDM drill is a production drilling machine controlled by a Heidenhain controller
*The newly developed sparking cercuits are special to the DNC42 EDM super drills to enhance machine speed excellent flushing lower wear & higher accuracy*
EDM: JM325D SUPER DRILL
SKU:
EDM100150
* The Joemars JM325D is specially designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM325D & JM528D EDM Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM528DZ SUPER DRILL
SKU:
EDM100180
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc.
EDM: CNC WT455 WIRE CUT
SKU:
EDM100220
EDM: CNC WT655 WIRE CUT
SKU:
EDM100240
EDM: CNC JMNC2010+HD50
SKU:
EDM100280
EDM: JM430+AZ50R+D430
SKU:
EDM100330
EDM: JM500+NZ50+D500
SKU:
EDM100340