- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
Back in Stock Soon
EDGE SANDER: TANNER W503 BELT 2260 X 152MM 1.5HP
$1,330.00
* The TANNER W0503 is a Heavy duty edge sander
* This newly designed belt oscillation system is combined with the main motor and gear system
* A powerful drive motor for efficient mass production
* Tables will tilt to 45ø and the height can be adjusted
* Belt change is a single lever action for rapid belt changing
* Both drums are rubber coated and balanced for smooth opperation
* The machine is equipped with a end table for curved sanding and two large tables for edge sanding
| Weight | 450 kg |
|---|
Description
| DESCRIPTION | Edge Sander |
|---|---|
| MODEL | W0503 |
| BELT SIZE | 2260 X 152mm |
| BELT SPEED | 3900F/min |
| FRONT TABLE SIZE | 812 X 177mm |
| AUXILIARY TABLE SIZE | 305 X 250mm |
| PLATEN TILTING | 0-90 Degrees |
| TABLE ADJUSTMENT | Up – Down 80mm |
| OSCILLATING DISTANCE | 19.0mm |
| DUIST COLLECTION CHUTE | 102mm |
| WEIGHT NETT/GROSS | 130/131kg |
| VOLUME | 0.4305cm |
Shipping & Delivery
Related products
EDGE SANDER: BS6 X 100-1 BELT: 152 X 2515.
SKU:
EDS241240
* Built to offer a smooth and reliable sanding performance
* The CT-108 will enable you to produce a quality fine edge finishing efficiently
* Featuring a powerful 3hp 1ph motor
* The CT-108 is equipped with a 7" diameter drive pulley and a 3 diameter idler pulley
* Both precision machined and dynamically balanced
* Both front and side tables are made from wood to prevent scratching the workpiece
EDGE SANDER: ES-689 E/TABLE
SKU:
EDS241280
* This sander will sand both vertical and horizontal position or any angle between 0 - 90deg
* Belt platen is made from precision ground steel
* Each end of the belt has a dust port for efficent dust collection
* The front cast iron table can be moved up and down as well as in and out
* Main sanding belt runs in precision ball bearings and is oscillated by a heavy duty worm and gear mechanism which is run in an oil bath
EDGE SANDER: ES-6108
SKU:
EDS241288
* Sanding belt can be used in a vertical or horizontal posistion or any angle between 0 - 90ø
* Belt platern is made from from precision ground steel
* On each end of the belt is a dust port for efficent dust collection
* The cast iron table can be moved up and down as well as back and forward
* Main sanding belt runs in precision ball bearings and is oscillated by a heavy duty worm and gear mechanism and runs in a oil bath
EDGE SANDER: MGD-120ED 5HP
SKU:
EDS241320
* Heavy duty edge sander
* This newly designed belt oscillation system is combined with the main motor and gear system * A powerful drive motor for efficient mass production
* Tables will tilt to 45ø and the height can be adjusted
* Belt change is a single lever action for rapid belt changing
* Both drums are rubber coated and balanced for smooth opperation
* The machine is equipped with a end table for curved sanding and two large tables for edge sanding