| DESCRIPTION | Dividing Plates |
|---|---|
| TYPE | Indexing |
| NUMBER OF PLATES | 2 |
| DIAMETER | – |
| TO SUIT | Vertex HV-8 Rotary Table |
| WEIGHT NETT/GROSS | 4.5kg |
| VOLUME | 0.0029cm |
| PACKING SIZE L X W X H | 220 x 220 x 60mm |
Description
SKU : RT-9581008
Price per Unit
$177.00 (Exc GST)
$203.55 (Inc GST)
FEATURES:
* Fits Vertex 8 rotary table by removing handwheel *
| Weight | 4.5 kg |
|---|---|
| Dimensions | 0.22 × 0.22 × 0.06 cm |
Specifications
Description
Reviews (0)
Shipping & Delivery
Related products
ROTARY TABLE: HV-4 4″ ALTO TILTING
SKU:
RT-9580002A
* This 4" Tilting rotary table is a very versitile unit
* Tilting range is 0 - 90 Degrees with positive locking
* Table diameter is 100mm
* Worm gear ratio 1:36 = 1 rotation will increase by 10 degrees
* Graduated indexing dial to 360 derees
* Centre height in verticle = 66.0mm approx
Hand wheel is graduated in 10 min divisions and can be set at zero
* Comes with tee slots in table
* Can be bolted in verticle or horizontal position
ROTARY TABLE: HV-4 4″ HOMGE
SKU:
RT-9580005
* Homge rotary tables are made in Taiwan
* This company is renown for their accuracy and overall quality
* This Rotary Table is fitted with a 4" slotted face plate
* This is to fit T-Slot nuts for fixing a workpiece
* Can be used both horizontal and verticle making it a very versitile indexing fixtureTW
ROTARY TABLE: HV-6 6″ ALTO
SKU:
RT-9580007
* Homge Rotary Tables are made from high density Meehanite casting with ground finish * Tested by Heidenhain electronic testing equipment to ensure the utmost quality
* Spindle end is supported by taper roller bearings to ensure stablity under cutting conditions
* Worm is hardened and ground and has a ratio of 90:1
* The worktable is graduated to the full 360ø so that one turn of the handle moves the table through 4ø
* Micro collar is graduated in steps of 1' min and vernier scale makes settings down to 10 seconds possible
* These rotary tables are popular for their excellent performance practical design and affordable cost
* Widely used for circular cutting work angle setting boring
ROTARY TABLE: HV 16 16″ VERTEX
SKU:
RT-9580016
* Table is made from high density Meehanite casting with ground finish
* Tested by Heidenhain electronic testing equipment to ensure the utmost quality
* Spindle end is supported by taper roller bearings to ensure stablity under cutting conditions
* Worm is hardened and ground and has a ratio of 90:1
* The worktable is graduated to the full 360ø so that one turn of the handle moves the table through 4ø
* Micro collar is graduated in steps of 1' min and vernier scale makes settings down to 10 seconds possible
* These rotary tables are popular for their excellent performance practical design and affordable cost
* Widely used for circular cutting work angle setting boring
POWER ROTARY TABLE: 10″ LIBO
SKU:
RT-9580115
* Table is made from high density Meehanite casting with ground finish
* Tested by Heidenhain electronic testing equipment to ensure the utmost quality
* Spindle end is supported by taper roller bearings to ensure stablity under cutting conditions
* Worm is hardened and ground and has a ratio of 90:1
* The worktable is graduated to the full 360ø so that one turn of the handle moves the table through 4ø
* Micro collar is graduated in steps of 1'min and vernier scale makes settings down to 10 seconds possible
* These rotary tables are popular for their excellent performance practical design and affordable cost
* Widely used for circular cutting work angle setting boring
* Controller has three wires, one of them is for powercord conected to DC 24W - 48V. Motor should be conected to 4 pin aviation socket and motor encoder should be connected to the 6 pin aviation conector
ROTARY CROSS TABLE: 425 X 240MM LIBO
SKU:
RT-9580210
* Table is made from high density Meehanite casting with ground finish
* Tested by Heidenhain electronic testing equipment to ensure the utmost quality
* Spindle end is supported by taper roller bearings to ensure stablity under cutting conditions
* Worm is hardened and ground and has a ratio of 90:1
* The worktable is graduated to the full 360ø so that one turn of the handle moves the table through 4ø
* Micro collar is graduated in steps of 1'min and vernier scale makes settings down to 10 seconds possible
* These rotary tables are popular for their excellent performance practical design and affordable cost
* Widely used for circular cutting work angle setting boring
DIVIDING PLATES: FOR TSK-10″
SKU:
RT-9581014
TAILSTOCK: TS-2 (HOMAGE)
SKU:
RT-9581052
Reviews
There are no reviews yet.