- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
CYCLONE: T-3000CK-H 2 STAGE 3HP
$5,300.00
This T-3000CK-H cyclone has exceptional perfprmance on both fine dust and chips
* Ease of mobility with special design castors
* Automatic filter cleaning for consistant performance
* Filter cartridge captures 99% of dust 0.20-2 microns in size
* Negative pressure in the drum design creates a vacuum between plastic bag & drum
* Remote control for convenient operation from virtually anyware in the shop
* This is a two stage high performance cyclone
| Weight | 204 kg |
|---|---|
| Dimensions | 1.35 × 0.87 × 2.1 cm |
Description
| DESCRIPTION | Two Stage Cyclone Extractor |
|---|---|
| MODEL | T-3000CK-H |
| AIR SUCTION CAPACITY | 1756cfm |
| STATIC PRESSURE | 12.5 ImH20 |
| INLET DIAMETER | 4 x 4″ |
| CANISTER FILTER SIZE | D500 x 1000mm (i Micron) |
| DRUM CAPACITY | 50 Gallon |
| SOUND RATING | 74db |
| MOTOR: | 3HP 230W 1 Phase |
| WEIGHT NETT/GROSS | 187/204kg |
| VOLUME | 2.4665cm |
Shipping & Delivery
Related products
CYCLONE: T-3000CK-C1 3HP MOTOR 1PH
SKU:
DE-110105
* Mobile cyclone dust extractor, suitable for small to medium sized workshops.
* Able to connect to two machines using the 2 x 100mm adaptor.
* Well built units with a steel impeller.
* Nice and quiet operation.
* Automatic filter cleaning for consistent airflow.
* A manometer gives a quick, visual indication of performance.
* Wheeled waste bin, makes the task of waste disposal easier.
* All round extractor, able to cope with all but the largest machines.
CYCLONE: DE-3100ECK 3HP 3PH
SKU:
DE-110110
* This cyclone is suitable for most medium size workshops.
* The 2200cfm capacity allows for good dust collection under all conditions.
* No clogging of filter - waste collected before it gets to the filter.
* Large filter surface area.
* Filters down to 1 micron.
* Small footprint.
* Collection drum is on wheels - making disposal of sawdust and waste easy.
* Mobile castor base allows you to get the machine in just the right spot.
CYCLONE: DE-25SECK TWO STAGE
SKU:
DE-110115
* Mobile cyclone dust extractor, suitable for small to medium sized workshops.
* Able to connect to four machines using the 4 x 100mm adaptor
* Well built units with a steel impeller.
* Nice and quiet operation
* Automatic filter cleaning for consistent airflow.
* A manometer gives a quick, visual indication of performance.
* Wheeled waste bin, makes the task of waste disposal easier.
* All round extractor, able to cope with all but the largest machines
* Supplied with remote control
CYCLONE: CT-25SDC 5HP 3PH
SKU:
DE-110140
CYCLONE: T-5000CK-H 5HP 2 STAGE 3 PHASE
SKU:
DE-110352
This T-5000CK-C2 cyclone has exceptional perfprmance on both fine dust and chips
* Ease of mobility with special design castors
* Automatic filter cleaning for consistant performance
* Filter cartridge captures 99% of dust 0.20-2 microns in size
* Negative pressure in the drum design creates a vacuum between plastic bag & drum
* Remote control for convenient operation from virtually anyware in the shop
* This is a two stage high performance cyclone