- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
CRC: 556 LUBRICANT 420ML LOW ODOUR
Excl. GST: $9.00
Incl. GST: $10.35
Incl. GST: $10.35
CRC: EXHAUST CEMENT BLACK TUBE 145GM
Excl. GST: $7.75
Incl. GST: $8.91
Incl. GST: $8.91
CRC: ORANGE ZINC 400ML
Excl. GST: $19.64
Incl. GST: $22.59
* CRC Orange Zinc’s unique formula combines superior rust inhibiting properties of zinc with a tough but flexable enamel coating and an orange gloss finish in a recognised safety colour * High levels of anti-corossive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent ashesion to bare metal * CRC Orange Zinc provides a gloss top-coat finish but unlike standart paint systems, resists undercutting and blistering from corrosion by forming an efficitive corrosion barrier * Touch dry in 15-30 minutes, full cure 24 hours *
| Weight | 0.514 kg |
|---|---|
| Dimensions | 0.2 × 0.08 × 0.08 cm |
In stock
Related products
CRC: PREP IT 400ML
SKU:
LUB425554
CRC: ETCH IT 400ML
SKU:
LUB425556
CRC: BLACK ZINC 460ML
SKU:
LUB425562
* CRC Black Zinc is ideal for outdoor protection of metals against rust * It can be used direclty on bare metalfor touch-up or coating * CRC Black Zinc will outlast standard paint systems * The dried coat is scratch and solvent resistant * Typically CRC Black Zinc will provide 36 months protection against rust in a moderatly corrosive outdoor environment, when a dry film thickness of 65 micron is applied *
CRC: BRIGHT ZINC 400ML
SKU:
LUB425564
* CRC Bright Zinc is ideal for outdoor protection of metals against rust * It is a quick drying, single component, scratch resistant Zinc rich coatiing * CRC Bright Zinc is formulated to givr protection higher than standard paint systems and dries to the colour of new galvanizing * The dried film contains 40% Zinc to provide 60 months protection against rust in a moderately corrosive environment when a film thickness of 65 mircon is applied * Ideal for after weld touch-ups *
CRC: YELLOW ZINC 400ML
SKU:
LUB425568
* CRC Yellow Zinc's unique formula combines superior rust inhibiting properties of zinc with a tough but flexable enamel coating and a yellow satin finish in a recognised safety colour * High levels of anti-corossive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent ashesion to bare metal * CRC Yellow Zinc provides a satin top-coat finish but unlike standart paint systems, resists undercutting and blistering from corrosion by forming an efficitive corrosion barrier * Touch dry in 15-30 minutes, full cure 24 hours *
METAFLUX: GALVANO ZINK AEROSOL
SKU:
PAT100120
METAFLUX: STAINLESS STEEL CARE 400ML
SKU:
PAT100130
COLOR SHINY FINISH STAINLESS STEEL DRY FILM STAINLESS STEEL CONTENT 62.0% ALLOYS : 16%Cr / 10% Ni / 3% Mo TEMP. RESISTANCE : UP TO +300c (+572F) METALLIC SURFACE COATING WITH EXTREMELY HIGH STAINLESS STEEL CONTENT AND SHINY EFFECT HIGHLY RESISTANT TO ACIDS AND ALKALIS 400ml MAY COAT UP TO 8-10 SQUARE METRES
METAFLUX: STAINLESS STEEL SPRAY 400ML
SKU:
PAT100174
Colour: stainless steel
- In the dry film stainless steel content: 62.0%
- Alloys: 16% Cr / 10% Ni/ 3% Mo
- Temp. resistance: up to +300°C
- Weather-resistant
- UV stabilised
- Prevents contact with air
- Non-rusting
- No purging required
Metallic surface coating with extremely high stainless steel content and shiny effect
The corrosion-resistant stainless steel coating combines the benefits of the high stainless steel alloy with those of the weatherproof artificial resins, lending the surface a metallic sheen
Highly resistant to acids and alkalis
Suitable for brushed, blasted, etched finishes.
Alloys: Chrome (Cr) 16%, Nickel (Ni) 10%, Molybdenum (Mo) 3%
Will not rub off
400 ml aerosol can, may coat up to 8-10 m²