CRC Multilube Gel is a unique synthetic penetrating gel specifically formulated to provide a clean, odourless lubricant for high-pressure and high-temperature applications. It contains friction modifiers, anti-wear additives and tacking agents, does not drip off or fling off at high speed and resists hot and cold wash-off for long-lasting protection. It is ideally suited for highly loaded reciprocal moving parts and for general use in heavy industries, workshops, automotive and around the home workshop. Applied as a clear oil with excellent capillary action CRC Multilube Gel penetrates quickly into tight areas before solvents evaporate leaving a waterproof load bearing gel that stays in place and withstands high pressure and shock load conditions. The speedy shift in viscosity provides both, excellent penetration action and premium staying power.

CRC CPC 250 is a clear, dry film corrosion inhibitor that creeps quickly to cover exposed metal surfaces, drives out moisture and leaves an ultra-thin, non-staining film that protects metal against corrosion. CRC CPC 250 is an exceptional choice for damp, moist or dusty storage environments. The thin film repels dirt and dust to keep stored parts and equipment clean and will not run or puddle during storage. CRC CPC 250 is highly effective in humid conditions or after floods. The protective film resists oxidation and prevents flash rusting during storage. Suitable for components which have been machined with water miscible fluids and require long-term storage prior to further use. Long-term or ongoing protection is gained through reapplication. If necessary the protection film can be easily removed with CRC Precision CO Contact Cleaner or solvents. Features & Benefits Dry Film – Treated parts may be easily handled without removing the film Non-Emulsifying in water – Promotes water displacement from surfaces Conductivity – Will not restrict electrical current flow Non-Staining – Will not discolour paper packaging Ready to Use – No additional mixing or chemical additives required Fast Drying – Allows parts to be handled quickly. Drying time to touch is one hour. Easy re-application over existing film and/or clean surfaces – Provides ongoing protection Safe on paint and most plastics Uses Hand tools, cutting tools Guns Blister-packed or shrink-wrapped metal parts Dies, moulds and parts in storage Electrical contacts and wiring terminals Machined parts prior to assembly Aluminium extrusions Protection against finger print corrosion on soft metals

* Superon " Flawcheck" will locate surface discontinuities or other indications on all non-porousmaterials (metals, plastics, ceramics etc ) include: Cracks, Seams, Porosity< Laps, Laminations, Cold Shuts * Used to detect welding, casting and forging defects, cracks and leaks in new components and fatigue on/in service components * Will deterct a wide spectrum of flaw sizes regardless of flaw orientation, up to 1 micron to 30 micron depth on standard NI-Cr test panel * Superior caplary action, Non-toxic, Non-corrosive, Free from halides & sulfides