- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BANDSAW: CY-355A DUAL MITRE MANUAL (TAIWAN)
$13,500.00
BANDSAW: UE-916A 9" 1PH (TAIWAN)
$6,500.00
BANDSAW: UE-712A 7″ HORZ (TAIWAN) BELT DRIVE
$1,895.00
* Blade speed is adjusted using a 4-step pulley drive system.
* Mitre cutting up to 45° by adjusting the vice.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Wire wheel cleans swarf off the blade while cutting.
* On castors for easy manoeuvrability.
* The most popular bandsaw in the range, suitable for any workshop.
* Made in Taiwan.
| Weight | 180 kg |
|---|---|
| Dimensions | 1.3 × 0.45 × 1.05 cm |
In stock
Description
| Description | Horizontal Bandsaw |
|---|---|
| Model | UE-712A |
| Capacity Round 90° (mm) | 180 |
| Capacity Rectangular 90° (mm) | 165 x 280 |
| Capacity Round 45° (mm) | 110 |
| Capacity Rectangular 45° (mm) | 110 x 180 |
| Blade Speeds (no.) | 4 |
| Blade Speeds (m/min) | 22, 33, 45, 65 |
| Blade Size L x H (mm) | 2360 x 19 |
| Motor (kW) | 0.75 |
| Voltage (V) | 240 |
| Weight Nett / Gross (kg) | 160 / 180 |
| Volume (m³) | 0.6143 |
| Packing Size L x W x H | 1300 x 450 x 1050mm |
Shipping & Delivery
Related products
BANDSAW: SJ-12AA 300MM AUTO ROLLER FEED (TAIWAN)
SKU:
BSH101855
* Heavy duty automatic bandsaw.
* Variable speed control with digital readout.
* Roller type bar feed for continuous automatic cutting.
* Automatic blade breakage power off system.
* Adjustable rod for the same cutting length.
* Counting device and out of stock sensor.
* Frequency invertor.
* Adjustable mounting feet.
* Instant blade tension ing with gauge.
* Large tungsten carbide blade guide.
* CE certified.
* Made in Taiwan.