- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BANDSAW: CY-355A DUAL MITRE MANUAL (TAIWAN)
$13,500.00
* Heavy duty dual mitre bandsaw with two speed motor.
* Higher working height for convenience.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Automatic blade breakage sensor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
| Weight | 855 kg |
|---|---|
| Dimensions | 1.18 × 0.97 × 1.13 cm |
In stock
Description
| Description | Euro type horizontal bandsaw |
|---|---|
| Model | CY-355A |
| Capacity Round 90° (mm) | 355 |
| Capacity Rectangular 90° (mm) | 280 x 490 |
| Capacity Round 45° (mm) | 355 |
| Capacity Rectangular 45° (mm) | 280 x 355 |
| Blade Speeds (no.) | 2 |
| Blade Speeds (m/min) | 35 & 70 |
| Blade Size L x H (mm) | 3,770 x 34 |
| Motor (kW) | 2.2 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 805/855 |
| Packing L x W x H | 1.2934 |
| Packing Size L x W x H (mm) | 2180 x 970 x 1130 |
Shipping & Delivery
Related products
BANDSAW : G-5027 DUAL MITRE
SKU:
BSH101200
* Heavy duty semi-automatic dual mitre saw.
* Control box for blade speed, descent rate & coolant.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Trigger type handle.
* Rugged fabricated steel construction.
* Easy blade change with adjustable tension.
* Built in coolant system with adjustable flow control to both sides of the cut.
* Adjustable roller guides for accurate cutting.
* Wire wheel cleans swarf off the blade while cutting.
* Made in Taiwan.
BANDSAW: CY-280N 225MM 1PH (TAIWAN)
SKU:
BSH101258
* European style bandsaw.
* Contol panel located on the front of the machine.
* Fitted with quick action lock/release vice.
* Swivel head adjustment for scaled mitre cutting.
* Emergency cut out switch.
* Coolant pump for cutting effiency and longer blade life.
* Mounted on drip tray with stand assembly.
* Hydraulic cylinder to control down feed during the cutting process.
* Made in Taiwan.
BANDSAW: CY-350RN 270MM 3PH ROUND TABLE
SKU:
BSH101266
* European style bandsaw.
* Round table.
* Contol panel located on the front of the machine.
* Fitted with quick action lock/release vice.
* Swivel head adjustment for scaled mitre cutting.
* Emergency cut out switch.
* Coolant pump for cutting effiency and longer blade life.
* Mounted on drip tray with stand assembly.
* Hydraulic cylinder to control down feed during the cutting process.
* Made in Taiwan.
BANDSAW: CY-350R 270MM 1PH (TAIWAN)
SKU:
BSH101270
* European style bandsaw.
* Round table.
* Contol panel located on the front of the machine.
* Fitted with quick action lock/release vice.
* Swivel head adjustment for scaled mitre cutting.
* Emergency cut out switch.
* Coolant pump for cutting effiency and longer blade life.
* Mounted on drip tray with stand assembly.
* Hydraulic cylinder to control down feed during the cutting process.
* Made in Taiwan.
BANDSAW: CY-275 225MM 2 SPEED 3PH (TAIWAN)
SKU:
BSH101350
* Quality bandsaw with a heavy duty gear drive system and two speed motor.
* Quick action lock & release vice.
* Higher working height for convenience.
* Mitre cutting up to 45° with pre-set angles on the vice.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Made in Taiwan.
BANDSAW: CY-300 DUAL MITRE 2 SPEED 3PH (TAIWAN)
SKU:
BSH101355
* Heavy duty dual mitre bandsaw with a two speed motor.
* Quick action lock & release vice, with unique sliding design.
* Higher working height for convenience.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Input support roller for long work pieces.
* Automatic blade breakage sensor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
BANDSAW: CY-350 DUAL MITRE SEMI-AUTOMATIC (TAIWAN)
SKU:
BSH101360
* Heavy duty, semi-automatic dual mitre bandsaw with two speed motor.
* Hydraulic vice, with unique sliding design.
* Higher working height for convenience.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Automatic blade breakage sensor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
BANDSAW: WG-500DSA DUAL MITRE (TAIWAN)
SKU:
BSH101685
* Taiwanese made semi-automatic dual-mitre bandsaw.
* Comprehensive control panel on telescopic pendant.
* Full length hydraulic vice, with unique sliding design.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Linear bearing on the base of the sliding vice for smooth movement.
* Rack type quick action vice with hydraulic clamping.
* Motor inverter controls the blade speed accurately and efficiently.
* Mobile coolant tray, convnient for when cutting angles.
* Material feeder for detecting cutting height and reducing cycle time.