- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
COMPRESSOR: I-POWER PETROL 60LTR 6.5HP 320L/MIN 8 BAR W/BATTERY
Excl. GST: $1,690.00
Incl. GST: $1,943.50
Incl. GST: $1,943.50
PME SISAL: 50 X 1S 12.0T 10MM
Excl. GST: $10.60
Incl. GST: $12.19
Incl. GST: $12.19
BANDSAW: CY-350RN 270MM 3PH ROUND TABLE
Excl. GST: $0.00
Incl. GST: $0.00
* European style bandsaw.
* Round table.
* Contol panel located on the front of the machine.
* Fitted with quick action lock/release vice.
* Swivel head adjustment for scaled mitre cutting.
* Emergency cut out switch.
* Coolant pump for cutting effiency and longer blade life.
* Mounted on drip tray with stand assembly.
* Hydraulic cylinder to control down feed during the cutting process.
* Made in Taiwan.
| Weight | 495 kg |
|---|---|
| Dimensions | 1.93 × 0.97 × 1.12 cm |
Description
| Description | Euro type horizontal bandsaw |
|---|---|
| Model | CY350RN |
| Capacity Round 90° (mm) | 270 |
| Capacity Rectangular 90° (mm) | 260 x 320 |
| Capacity Round 45° (mm) | 230 |
| Capacity Rectangular 45° (mm) | 210 x 220 |
| Blade Speeds (no.) | 1 |
| Blade Speeds (m/min) | 36 / 72 |
| Blade Size L x H (mm) | 2,925 x 27 x 0.9 |
| Motor (kW) | 2.2 |
| Voltage (V) | 400 |
| Weight Nett / Gross (kg) | 445 / 495 |
| Volume (m³) | 2.0960 |
| PACKING SIZE |
Shipping & Delivery
Related products
BANDSAW: CY-260N 225MM 1PH (TAIWAN)
SKU:
BSH101254
* European style bandsaw
* Contol panel located on the front of the machine
* Fitted with quick action lock/release vice
* Swivel head adjustment for scaled mitre cutting
* Emergency cut out switch
* Coolant pump for cutting effiency and longer blade life
* Mounted on drip tray with stand assembly
* Hydraulic cylinder to control down feed during the cutting process
BANDSAW: CY-210 170MM 3PH (TAIWAN)
SKU:
BSH101340
* Quality bandsaw with a heavy duty gear drive system.
* Quick action lock & release vice.
* Higher working height for convenience.
* Mitre cutting up to 45° with pre-set angles on the vice.
* Two speed motor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Made in Taiwan.
BANDSAW: CY-350 DUAL MITRE SEMI-AUTOMATIC (TAIWAN)
SKU:
BSH101360
* Heavy duty, semi-automatic dual mitre bandsaw with two speed motor.
* Hydraulic vice, with unique sliding design.
* Higher working height for convenience.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Automatic blade breakage sensor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
BANDSAW: BMT-260SL 227M MITRE (TAIWAN) (Swivel)
SKU:
BSH101388
* Quick action lock & release vice.
* Higher working height for convenience.
* Mitre cutting up to 45° with pre-set angles on the vice.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Made in Taiwan.
BANDSAW: UE-712SB 7″ MITRE (TAIWAN) BELT DRIVE (Swivel)
SKU:
BSH101435
* Blade speed is adjusted using a pulley drive system.
* Dual mitre cutting up to 45° using the swivel head and sliding vice, no need to move the material.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Wire wheel cleans swarf off the blade while cutting.
* On castors for easy manoeuvrability.
* Made in Taiwan.
BANDSAW: UE-918SSA 9″ MITRE (TAIWAN)
SKU:
BSH101664
* Quality semi-automatic bandsaw.
* Control box on top of bow for descent rate & coolant.
* Mitre cut up to 45° with a swivel head and quick release vice.
* Rugged steel construction.
* Easy blade change with adjustable tension.
* Built in coolant system with flow control to both sides of the cut.
* Variable speed drive using stepless pulley and adjustment knob.
* Heavy duty guide frame with measuring scale.
* Adjustable roller guides for accurate cutting.
* Wire wheel cleans swarf off the blade while cutting.
* Made in Taiwan.
BANDSAW: UE-530DSA 21″ DUAL MITRE (TAIWAN)
SKU:
BSH101683
* Comprehensive control panel.
* Hydraulic vice, with unique sliding design and pressure gauge.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Variable speed with digital speed display.
* Hydraulic blade tensioner with automatic settings.
* Fabricated steel construction.
* Mechanical stroke counter.
* Precision swivel scale with magnified reader.
* Powered wire wheel cleans swarf off the blade while cutting.
* Built in coolant system with flow control to both sides of the cut.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
BANDSAW: BS-280C SEMI- AUTO HORZ
SKU:
BSH102200
* This adaptable swivel head bandsaw can swivel up to 45° and 30°.
* Robust twin column construction.
* Auto power off if blade breaks.
* Stroke limit switch.
* Auto return to height which is set by limit switch.
* Strong all steel welded frame for durability and long service.
* Comes with adjustable roller stand.