- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
AIR TOOL OIL: ZS22 1 LITRE CONTAINER
$28.00
* Light oil suitable for all air tools * Most of the problems that occur with air tools is normally caused by lack of oil or the wrong type of oil *
| Weight | 0.96 kg |
|---|---|
| Dimensions | 0.18 × 0.14 × 0.07 cm |
In stock
Related products
AIR TOOL OIL: 250 CC
SKU:
OIL420000
AIR TOOL OIL: 20 LITRE
SKU:
OIL420010
* Designed for use with airtools
* Recomended that you oil airtools every day before use
* Total is designed as a high speed lubricant that will not clog up the vanes on your tool
* You need to have the correct oil to get the maximum life out of your airtools
* It is an ISO Grade 68 oil and has a temperature range of -40°F to 500°F (-40°C to 260°C). Super Lube® Air Tool Pneumatic Lubricant is dielectric, food grade and clean. For rubber and plastic applications see Compatibility Chart under Technical Resources.
*
COMPRESSOR OIL: AIRCOL PD68 2LTR
SKU:
OIL420050
HYSPIN OIL: AWS-32 20 LITRES
SKU:
OIL600118
The Castrol Hyspin AWSâ„¢ hydraulic oil range is based upon highly refined mineral oil enhanced with a stabilised zinc
additive system.
Application
Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven
additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent
hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin
AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range
is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears,
variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone
and fluropolymer seal materials.
Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM
Hyspin AWS (for appropriate viscosity grade) is approved by:
Parker Hannifin (Denison) HF0, HF1 & HF2
Eaton E-FDGN-TB002-E
SPIRIT WBF 7200: 1 LTR CUTTING OIL FOR STAINLESS
SKU:
OIL600460
TRANSMISSION OIL: 5LTR FUCHS TITAN ATF D3
SKU:
OIL700280
TITAN ATF D3
A multifunctional ATF for Passenger Cars and Commercial Vehicles requiring a Dexron® III specification
TITAN ATF D3 is a Multifunctional Automatic Transmission Fluid, providing longer life and smoother gear shifts. Recommended for Passenger Cars and Commercial Vehicles requiring a Dexron® III specification. Automatic Transmission Fluid is specially formulated to conform to GM and Ford specifications. Supercedes Dexron®.
Not suitable where Dexron VI is called for.
Suitable for use for the following applications: ATF Dexron® III Ford MERCON® Allison C-4 Caterpillar TO-2.
DIESEL ENGINE OIL: RUBIA CF2-40 20LTR (2 STROKE)
SKU:
OIL700310
Monograde lubricant for two stroke Diesel engines SPECIFICATIONS International specifications API CF-2/CF MIL.L. 46152B Meets the requirements of  Detroit Diesel : Oil typ 1 and 2 for series : 53, 71, 92, 110 and 149 marine APPLICATIONS This lubricant is suitable for all two stroke Diesel engines when API CF-2 or API CD II specifications are required. TOTAL RUBIA CF-2 40 has been especially developed for the lubrication of two stroke Detroit Diesel engines. It also can be used in Diesel or gasoline engines of old vehicles. PERFORMANCES AND CUSTOMER BENEFITS  Good anti-wear and anti-corrosion properties  Excellent anti-oxidation properties allowing long time idle or very severe working conditions (hot climates, heavy load…)  Low ash value ensuring good engine cleanliness  Very high performance detergent and dispersant additives PHYSICAL AND CHEMICAL CHARACTERISTICS* TOTAL RUBIA CF-2 40 Method Value Kinematic Viscosity at 40°C mm2 /s ASTM D445 145.9 Kinematic Viscosity at 100°C mm2 /s ASTM D445 14.5 Viscosity Index - ASTM D2270 98 T.B.N mgKOH/g ASTM D2896 7.1 Pour Point °C ASTM D97 -15 Sulphated Ash % m/m ASTM D874 0.77
DIESEL ENGINE OIL: RUBIA 4000 15W40 20L(4 STROKE)
SKU:
OIL700315