| DESCRIPTION | End Mill – Centre Cut |
|---|---|
| MATERIAL | HSS-Co5 5% Cobalt |
| DIAMETER | 5.0mm |
| FLUTES | 4 Flute |
| FLUTE LENGTH | 17.0mm |
| LENGTH O/A | 60.0mm |
| SHANK DIAMETER | 6,0mm |
| SHANK TYPE | Plain |
| FINISH | Ground-Bright-Uncoated |
| WEIGHT NETT/GROSS | 0.040kg |
| VOLUME | 0.0001cm |
Description
SKU : EM-7406005
Price per Unit
$22.00 (Exc GST)
$25.30 (Inc GST)
FEATURES:
* This End Mill is a Standard, General Purpose with 4 Flutes
* Single End, Square End Style
* Center Cutting Type
* Right Hand Cut HSS-Co5 (5% Carbide)
* Rhc 30 Deg, Rhh 30 Deg
* For Plunge Cutting
* Peripheral Milling
* Deep Slotting and Pocketing at Higher Feed and Speeds
| Weight | 0.04 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
Specifications
Description
Shipping & Delivery
Related products
END MILL: HSS 11.0MM STD
SKU:
EM-700432
END MILL: HSS 13.0MM STD
SKU:
EM-700440
END MILL: HSS 17.0MM STD
SKU:
EM-700456
END MILL: HSS 24.0MM STD
SKU:
EM-700484
END MILL: HSS 7/16″ STD
SKU:
EM-700640
END MILL: 5.0MMHSS-Co8 4 FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210205
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 11.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210211
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 14.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210214
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *