- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BANDSAW BLADE; 3280 x 19 x 10TPI CB (WOOD)
$60.00
* Bandsaws and reciprocating saw blades are often made with bimetal construction
* The teeth, made of high speed steel, are bonded (by various methods, for example, electron beam welding or laser beam welding) to the high-strength carbon steel base
* Such construction makes for blades with a better combination of cutting speed and durability than shown by non-bimetal blades, because the advantages and disadvantages of each of the metals are applied in the best locations: the teeth are harder (and thus cut better), but therefore also brittler; meanwhile, the body area of the band is softer (which would make for poorer teeth), but also less brittle, and thus more resistant to cracking and breaking (which is desirable in the body area) *
| Weight | 0.484 kg |
|---|---|
| Dimensions | 0.36 × 0.36 × 0.04 cm |
Related products
BANDSAW BLADE: 1440 x 13 BI-METAL 10TPI >CY125
SKU:
BSB500352
* Bandsaws and reciprocating saw blades are often made with bimetal construction
* The teeth, made of high speed steel, are bonded (by various methods, for example, electron beam welding or laser beam welding) to the high-strength carbon steel base
* Such construction makes for blades with a better combination of cutting speed and durability than shown by non-bimetal blades, because the advantages and disadvantages of each of the metals are applied in the best locations: the teeth are harder (and thus cut better), but therefore also brittler; meanwhile, the body area of the band is softer (which would make for poorer teeth), but also less brittle, and thus more resistant to cracking and breaking (which is desirable in the body area) *
BANDSAW BLADE: 2520 x 12MM 14TPI BI METAL
SKU:
BSB555008
BANDSAW BLADE: 1735 x 13mm x 14 TPI Bi-Metal
SKU:
BSB556514
BANDSAW BLADE: 1735 x 13mm x 8 /12 Vari TPI
SKU:
BSB556515
* Bandsaws and reciprocating saw blades are often made with bimetal construction
* The teeth, made of high speed steel, are bonded (by various methods, for example, electron beam welding or laser beam welding) to the high-strength carbon steel base
* Such construction makes for blades with a better combination of cutting speed and durability than shown by non-bimetal blades, because the advantages and disadvantages of each of the metals are applied in the best locations: the teeth are harder (and thus cut better), but therefore also brittler; meanwhile, the body area of the band is softer (which would make for poorer teeth), but also less brittle, and thus more resistant to cracking and breaking (which is desirable in the body area) *
BANDSAW BLADE: BMT-608 2060 X 20 X 0.9 18T BI-METAL
SKU:
BSB557280
* Bandsaws and reciprocating saw blades are often made with bimetal construction
* The teeth, made of high speed steel, are bonded (by various methods, for example, electron beam welding or laser beam welding) to the high-strength carbon steel base
* Such construction makes for blades with a better combination of cutting speed and durability than shown by non-bimetal blades, because the advantages and disadvantages of each of the metals are applied in the best locations: the teeth are harder (and thus cut better), but therefore also brittler; meanwhile, the body area of the band is softer (which would make for poorer teeth), but also less brittle, and thus more resistant to cracking and breaking (which is desirable in the body area) *
BANDSAW BLADE: 68″ X 1/2″ X 10-14T BI-METAL
SKU:
BSB557282
* Bandsaws and reciprocating saw blades are often made with bimetal construction
* The teeth, made of high speed steel, are bonded (by various methods, for example, electron beam welding or laser beam welding) to the high-strength carbon steel base
* Such construction makes for blades with a better combination of cutting speed and durability than shown by non-bimetal blades, because the advantages and disadvantages of each of the metals are applied in the best locations: the teeth are harder (and thus cut better), but therefore also brittler; meanwhile, the body area of the band is softer (which would make for poorer teeth), but also less brittle, and thus more resistant to cracking and breaking (which is desirable in the body area)
BANDSAW BLADE: 712 2362 X 19MM X 22TPI CARBON
SKU:
BSB558420S
BANDSAW BLADE: 330 4100 X 34 X 8/12 BI-METAL
SKU:
BSB558690
* Bandsaws and reciprocating saw blades are often made with bimetal construction
* The teeth, made of high speed steel, are bonded (by various methods, for example, electron beam welding or laser beam welding) to the high-strength carbon steel base
* Such construction makes for blades with a better combination of cutting speed and durability than shown by non-bimetal blades, because the advantages and disadvantages of each of the metals are applied in the best locations: the teeth are harder (and thus cut better), but therefore also brittler; meanwhile, the body area of the band is softer (which would make for poorer teeth), but also less brittle, and thus more resistant to cracking and breaking (which is desirable in the body area) *