- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
CUT OFF SAW: LC1230 12″ MAKITA TCT BLADE
$999.00
* Portable cut off saw suitable for cutting pipe angle iron etc
* Bench or floor mounted
* A very portable and versitile cut off saw
* Comes with 305mm TCT cold cut blade
* Low sparking, minimal dust, burr free cutting edges
* Suitable for mild steel, sheet, pipe, channel, threaded rod
| Weight | 18 kg |
|---|---|
| Dimensions | 0.58 × 0.38 × 0.45 cm |
In stock
Description
| DESCRIPTION | Cold Cut Saw |
|---|---|
| MAKE | Makita |
| MODEL | LC1230 |
| BLADE SIZE | 305mm |
| BLADE TYLE | TCT 78 Teeth – Max 2000rpm |
| BORE SIZE | 25.4mm |
| CUTTING CAPACITY 90° | 115mm |
| CUTTING CAPACITY 45° | 85.0mm |
| BLADE CODE | B-15805 |
| MOTOR | 1750w 230v |
| BLADE SPEED | 1300rpm |
| WEIGHT NETT/GROSS | 18.0kg |
| VOLUME | 0.0992cm |
| MANUFACTURES WARANTY | 2 Years (Blade not inclded) |
Shipping & Delivery
Related products
CUT OFF SAW: THOMAS 250 TECHNICS 240V 1 PHASE
SKU:
COM105210
Manual disc miter saw 250 TECHNICS: practical, safe and easy to handle, suitable for cutting metal profiles and solid material.
Version with 250 mm HSS blade capacity with the possibility of cutting from 0 ° up to 45 ° left and right.
Handle with dead man control to start or stop the movement of the blade.
Quick locking vice complete with anti-burr bracket.
Lubrication-cooling device by means of a pump with jet break valve and filter.
Cutting cycle
Adjustment of the vice and locking of the material to be cut by means of a handwheel.
Manual descent of the disc holder head by means of a lever with maintained action switch. Manual head return.
CUT OFF SAW: THOMAS 250 TECHNICS 415V 3 PHASE
SKU:
COM105212
Manual disc miter saw 250 TECHNICS: practical, safe and easy to handle, suitable for cutting metal profiles and solid material.
Version with 250 mm HSS blade capacity with the possibility of cutting from 0 ° up to 45 ° left and right.
Handle with dead man control to start or stop the movement of the blade.
Quick locking vice complete with anti-burr bracket.
Lubrication-cooling device by means of a pump with jet break valve and filter.
Cutting cycle
Adjustment of the vice and locking of the material to be cut by means of a handwheel.
Manual descent of the disc holder head by means of a lever with maintained action switch. Manual head return .
CUT OFF SAW: THOMAS 315 SUPER CUT 240V 1 PHASE
SKU:
COM105215
Robust cast-iron bench.
Vice and cutting head in cast-iron providing high stability and vibration free cutting.
Reduction unit running in oil bath with hardened worm screw and bronze gear.
Coolant liquid with mechanical pump and crucible.
Blade disc 315 mm.
Two way miter cutting (from 0° to 45° right and left).
Single speed 41 rpm monophase motor.
Quick lock vice with anti-burr clamping
CUT OFF SAW: THOMAS 315 SUPER CUT 415V 3 PHASE
SKU:
COM105217
Robust cast-iron bench.
Vice and cutting head in cast-iron providing high stability and vibration free cutting.
Reduction unit running in oil bath with hardened worm screw and bronze gear.
Coolant liquid with mechanical pump and crucible.
Blade disc 315 mm.
Two way miter cutting (from 0° to 45° right and left).
Two cutting speeds threephase motor
Quick lock vice with anti-burr clamping
CUT OFF SAW: THOMAS 350 SUPER TECHNICS 415V 3 PHASE
SKU:
COM105220
Robust cast-iron bench.
Vice and cutting head in cast-iron providing high stability and vibration free cutting.
Reduction unit running in oil bath with hardened worm screw and bronze gear.
Coolant liquid with mechanical pump and crucible.
Double mitre manual circular saw for solid materials and profiles (construction steels in general).
Blade disc 350 mm.
Two way miter cutting (from 0° to 45° right and left).
Two cutting speeds threephase motor.
Low revolution motor 22/44 rpm low cutting speed for stainless steel and hard metal.
Quick lock vice with anti-burr clamping
THOMAS 250 TECHNICS: MOBILE BLADE GUARD # 99300053
SKU:
COM105260
THOMAS 315 SUPER CUT: MOBILE BLADE GUARD # AHB80051
SKU:
COM105270
THOMAS ALL MODELS: COOLANT PUMP # 88141000
SKU:
COM105297