- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: JESSEY STUDTURN 360 X 750MM (TAIWAN)
$20,000.00
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Optional two-speed motor with 16 speeds, 35 – 2000rpm.
* Optional variable speed motor, 35 – 2500rpm.
* Smooth, easy speed change selection.
* Feed rod fitted with an overload clutch for safety.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
| Weight | 1000 kg |
|---|---|
| Dimensions | 1.955 × 0.76 × 1.65 cm |
Description
| Swing Over Bed (mm) | 360 |
|---|---|
| Swing Over X-slide (mm) | 215 |
| Swing Over Gap (mm) | 560 |
| Between Centres (mm) | 750 |
| Bed Width (mm) | 250 |
| Spindle Nose | D1-5 |
| Speeds (no.) | 8 |
| Speed Range (rpm) | 70 – 2000 |
| Spindle Bore (mm) | 42 |
| Spindle Taper | MT5 |
| Metric Threading (M) | 0.5 – 6.0 |
| Imperial Threading (tpi) | 4 – 56 |
| Tailstock Taper | MT3 |
| Motor (kW) | 3.75 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 900 / 1,100 |
| Volume | 2.4516cm |
| Packing Size L x W x H (mm) | 1955 x 760 x 1450mm |
Shipping & Delivery
Related products
LATHE: LD-1430E 360 X 750MM 3PH WITH DRO QCT (TAIWAN)
SKU:
L--109295
* Induction hardened & precision ground V-way beds.
* Hardened & ground headstock gears.
* Cast from quality high tensile cast iron.
* Sino 2 axis digital readout.
* Coolant pump & tank system.
* Fitted with a work lamp & foot brake for added safety.
* Quickchange toolpost for speedy tool changing.
* Dual graduation thread dial.
* Gap bed for larger diameter work pieces.
* Manufactured in Taiwan.
LATHE: JESSEY STUDTURN 360 X 1000MM (TAIWAN)
SKU:
L--110142
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Optional two-speed motor with 16 speeds, 35 - 2000rpm.
* Optional variable speed motor, 35 - 2500rpm.
* Smooth, easy speed change selection.
* Feed rod fitted with an overload clutch for safety.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
LATHE: WM-330BV 330 X 1000 X 51MM BORE V/SPEED 1 PHASE
SKU:
L--120000
* The WM-330BV is variable speed with frequency inverter.
* The D1-5 spindle comes with a 51.0mm bore.
* Comes with gap bed for those larger diameter workpieces.
* Automatic feed and thrading are fully interlocked.
* Inductioned hardened and precision ground V bedways.
* Hardened and precision ground headstock gears.
* Fitted with independent leadscrew and feed shaft
LATHE: WM330 330 X 500 X 38MM BORE -L1320, 1 PHASE
SKU:
L--120466
* Precision ground and supersonic frequency hardened bedways.
* The spindle is supported with precision roller bearings.
* Head stock gears are made of high quality steel ground and hardened.
* Sealed and easy operating feed box has various feeds and thread cutting functions.
* ASA D1-4 camlock spindle nose.
* Machine is fitted with foot brake & work lamp for extra safety.
* Short bed length and space saving for training institutions.
* Fitted with safety chuck guard.
LATHE: GLH-330 330 X 1000 X 38MM 1 PHASE (NEW)
SKU:
L--120470H
* New Model
* Precision ground and supersonic frequency hardened bedways.
* The spindle is supported with precision roller bearings.
* Head stock gears are made of high quality steel ground and hardened.
* Sealed and easy operating feed box has various feeds and thread cutting functions.
* ASA D1-4 camlock spindle nose.
* Machine is fitted with foot brake & work lamp for extra safety.
* Short bed length and space saving for training institutions.
* Fitted with safety chuck guard.
* Emergency stop buttons both ends of chip tray
LATHE: SHOPTURN-280G 280 X 650 X 26MM BORE G/HEAD 1 PHASE
SKU:
L--165278
* Compact lgeared Head Lathe with 12 speed precision ground gears
* Induction hardened & precision ground bedways.
* Headstock is gear driven in oil bath.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Metric & imperial threading dial indicator.
* Extra wide bedway for more capacity.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: WM-290V-F 290 X 700 X 38MM BORE V/SPEED DC MTR
SKU:
L--165288
* The WF290V-F bench lathe is fitted with a delta inverter and viariable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Longitudinal and cross feeds.
* Automatic feed & threading are fully interlocked.
* Fitted with quickchange toolpost.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: WM-290V 290 X 700 X 38MM BORE V/SPEED 1 PHASE
SKU:
L--165290
* The WF290V-F bench lathe is fitted with a delta inverter and viariable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Longitudinal feed.
* Automatic feed & threading are fully interlocked.
* Fitted with quickchange toolpost.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.