- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
WELDON CHUCK ADAPTOR: 1/2″ X 20TPI
$65.86
* This drill chuck adaptor has weldon shank with 1/2″ x 20tpi thread for mounting a threaded drill chuck
| Weight | 0.08 kg |
|---|---|
| Dimensions | 0.1 × 0.04 × 0.04 cm |
In stock
Related products
MCD 32: DRILL CHUCK 3-16MM WELDON SHANK ADAPTOR
SKU:
DC-222316
MAG/DRILL: EUROBOOR EBM-360 30MM BATTERY OPPERATED
SKU:
DSM360400
`* Euorboor EBM-360 Magnetic Drilling system with 37W battery able to cope with the heaviest of work.
* At 10.2kg including battery it is lightweight and compact
* Unlimited mobility with this drilling unit
* The battery delivers maximum power and runtime
* Fitted with permanent magnet for safe operation and suitable for thin material
* Comes with brushless motor which is more efficient and less downtime
* The drilling system features a complete coolant system and roller bearing arbor support
* EBM series is compatable with Makita platform so same batteries can be used
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-TUBE 30 – 30MM CAPACITY
SKU:
DSM360403
* Euorbor ECO-TUBE 30- Magnetic Drilling system with a 900W motor to cope with the heaviest of work.
* No electricity required for magnetic base.
* Unique flexible features for pipes of various sizes.
* No special attachments needed to accommodate flat or curved surfaces.
* Highly stable wide stance.
* Two separate magnets allow the machine to swing away without losing position.
* Easy to handle.
* Direct spindle drive.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-32-32MM CAPACITY
SKU:
DSM360404
* Euorboor ECO-32- Magnetic Drilling system with 1000W motor to cope with the heaviest of work.
* At 12.6kg it is lightweight and compact.
* The drilling system features a complete coolant system and roller bearing arbor support.
* Easily mounts weldon twist drills up to 13mm diameter and countersiks to 40mm
* This light and reliable machine is a true addition for every workplace
* Comes with 12 month warranty.
.
MAG/DRILL: EUROBOOR ECO-32-T V/SPEED
SKU:
DSM360406
* Euorbor ECO-32-T Magnetic Drilling & Tapping system with 1050w Reversing motor to cope with the heaviest of work
* At 12.6kg lightweight and compact
* The drilling & Tapping system features a complete coolant system and roller bearing arbor support to extend cutter life
* Suitable for core drills up to Ø 32 mm, Weldon spiral drills up to Ø 13 mm and countersinks up to Ø 40 mm
* Easily mounts 3 Jaw Drill Chuck.
* Magnetic Holding Deadlift: 2 200 lbs
* Magnet Dimensions: 170 X 85 X 48mm footprint
* Comes with 12 month warranty
MAG/DRILL: EUROBOOR ECO-40/2 40MM CAPCITY
SKU:
DSM360409A
MAG/DRILL: EUROBOOR ECO-100/4D 100MM CAPACITY
SKU:
DSM360434A
* Euorbor ECO 100/4 Magnetic Drilling system with 1.9kW motor to cope with the heaviest of work.
* The automatic drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* Rotating base allows for a wide range of drilling operations.
* This model features LED load indicator with oil bath gearbox.
* Spindle is MT3.
* Comes with 12 month warranty
EUROBOOR ECO-30: CARBON BRUSHES ( PAIR)
SKU:
DSM360438