- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
INDEXABLE END MILL: 20.0MM DIA X 20.0MM S/HANK MAROX
Excl. GST: $112.80
Incl. GST: $129.72
Incl. GST: $129.72
MOTO TOOL: DREMEL 395
Excl. GST: $302.40
Incl. GST: $347.76
Incl. GST: $347.76
INDEXABLE END MILL: 25.0MM DIA X 25.0MM S/SHANK MAROX
Excl. GST: $125.71
Incl. GST: $144.57
* Straight shank 90deg positive rake end mill with replaceable inserts * Takes two APMT inserts * Manufactured in Taiwan *
| Weight | 0.436 kg |
|---|---|
| Dimensions | 0.15 × 0.04 × 0.04 cm |
In stock
Description
| DESCRIPTION | Indexable End Mill |
|---|---|
| BRAND | MAROX (Taiwan) |
| DIAMETER | 25.0mm |
| APPROACH ANGLE | 90deg Positive |
| SHANK DIAMETER | 25.0mm |
| LENGTH O/A | 125mm |
| INSERTS | 3pcs |
| INSERT TYPE | APHT 1003 Ltt800732 |
| CHEVPAC CODE | LTT800732 |
| DRAW BAR THREAD | Nil |
| WEIGHT NETT/GROSS | 0.434/ 0.436kg |
| VOLUME | 0.0002cm |
Shipping & Delivery
Related products
INDEXABLE END MILL: 16.0MM HARLINGEN
SKU:
EMT200125
INDEXABLE END MILL: 25.0MM HARLINGEN
SKU:
EMT200140
INDEXABLE END MILL: 12.0MM DIA 16.0MM SHANK (CANELA)
SKU:
EMT621180
* This positive milling cutter with an exact angle of 90deg uses very strong inserts allowing depth passes and high feed per teeth. The insert is fixed by a torx screw that allows a good chip evacuation and easy use. Equipped with short cylindrical shank and internal coolant. APPLICATIONS: This face and square (angle 90deg) slot and side milling cutter works well on steels alloyed steels stainless steels refractory casts and aluminium alloys. This general milling cutter for diversified applications is recommended for conventional milling machines and machining centers. Uses positive 11deg clearance - Rectangular inserts.
INDEXABLE END MILL: 16.0MM DIA 20.0MM SHANK (CANELA)
SKU:
EMT621182
CHARACTERISTICS: This positive milling cutter with an exact angle of 90deg uses very strong inserts allowing depth passes and high feed per teeth. The insert is fixed by a torx screw that allows a good chip evacuation and easy use. Equipped with short cylindrical shank and internal coolant. APPLICATIONS: This face and square (angle 90deg) slot and side milling cutter works well on steels alloyed steels stainless steels refractory casts and aluminium alloys. This general milling cutter for diversified applications is recommended for conventional milling machines and machining centers. Uses positive 11deg clearance - Rectangular inserts.
PROFILE CUTTER: 12.0MM SHANK X 35.0MM LONG (CANELA)
SKU:
EMT621214
INDEXABLE END MILL: 52.0MM DIA X 22.0MM BORE (CANELA)
SKU:
EMT621232
CYL MODULAR SHANK: 16.0MM DIA X L73.0MM 8.0MM (CANELA)
SKU:
EMT621233
INSERTS: APMT1135PDER SUIT EMT270100/102
SKU:
EMT621430