- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: JM430+AZ75DR+D430
Excl. GST: $32,343.00
Incl. GST: $37,194.45
Incl. GST: $37,194.45
JOEMARS EDM DRILL: 6MM BRASS PER/EACH
Excl. GST: $25.00
Incl. GST: $28.75
Incl. GST: $28.75
EDM: JM500+NZ50+D500
Excl. GST: $45,740.00
Incl. GST: $52,601.00
NEW ZNC PROGRAMABLE FOR AUTO MACHINING FROM ROUGH TO FINE FINISHING.
| Weight | 2130 kg |
|---|---|
| Dimensions | 1.645 × 1.9 × 2.455 cm |
Description
| CAPACITY OF TANK | 570 Ltrs |
|---|---|
| WORK TABLE | 750mm X 520mm |
| TRAVEL X | 500mm |
| TRAVEL Y | 400mm |
| SPINDLE HEADSTOCK TRAVEL | 300mm |
| MAX ELECTRODE WEIGHT | 150kg |
| MAX TABLE WEIGHT | 1200kg |
| MAX WORKTABLE CLEARANCE | 150 – 650mm |
| MAX OUTPUT | 50amps |
| VOLTAGE | 380v 3 Phase |
| MAX PROCESSING SPEED | |
| WEIGHT NETT/GROSS | 2130kg |
| VOLUME | 7.66cm |
Shipping & Delivery
Related products
EDM: TR100 TAP REMOVER
SKU:
EDM100030
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: JM325D SUPER DRILL
SKU:
EDM100150
* The Joemars JM325D is specially designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM325D & JM528D EDM Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM528D SUPER DRILL
SKU:
EDM100160
* The Joemars JM528D is specialy designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM235D &JM528D Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM528DZ SUPER DRILL
SKU:
EDM100180
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc.
EDM: CNC WT455S WIRE CUT
SKU:
EDM100230
EDM: CNC WT655 WIRE CUT
SKU:
EDM100240
EDM: JM430+AZ75DR+D430
SKU:
EDM100332
JM430+AZ50R+D430: AUTOMATIC FIRE EXTINGUISHER
SKU:
EDM100360