- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: CNC JMNC2010+HD50
Excl. GST: $0.00
Incl. GST: $0.00
Incl. GST: $0.00
EDM: JM430+AZ50R+D430
Excl. GST: $31,135.00
Incl. GST: $35,805.25
Incl. GST: $35,805.25
EDM: JM32NZ COMPACT
Excl. GST: $58,000.00
Incl. GST: $66,700.00
* The Joemars JM32Z (compact) has a maximum metal removal rate of 390mm3/min
* Best surface roughness 0.25umRa
* Electrode wear ratio 0.2%
* Fiotted with new Fuzzy Logic control concept which holds 50 job numbers
* 12 Kinds of machining parameters and 9600 sets of machining parameters *
| Weight | 1230 kg |
|---|
Description
| CAPACITY OF TANK | |
|---|---|
| WORK TABLE | 600mm X 300mm |
| TRAVEL X | 300mm |
| TRAVEL Y | 200mm |
| SPINDLE HEADSTOCK TRAVEL | 400mm |
| MAX ELECTRODE WEIGHT | 60Kg |
| MAX TABLE WEIGHT | 550Kg |
| MAX RAM WORKTABLE CLEARANCE | 590mm |
| MAX OUTPUT | 50Amp |
| VOLTAGE | 4.5kva Input |
| MAX PROCESSING SPEED | |
| WEIGHT NETT/GROSS | 1230 / 1230kg |
| VOLUME | 6.400cm |
Shipping & Delivery
Related products
EDM: TR100 TAP REMOVER
SKU:
EDM100030
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: JM325DZ SUPER DRILL
SKU:
EDM100170
* The Joemars JM325DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn operation and be confident in only a few hours
* Includes 3 axis DRo system: X Y axis use linear scale Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival Arcing Low Dielectric level For safety and on short electrode
* Anti hitting system for electrode
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc
EDM: JM528DZ SUPER DRILL
SKU:
EDM100180
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc.
EDM: CNC WT455S WIRE CUT
SKU:
EDM100230
EDM: JM430+AZ50R+D430
SKU:
EDM100330
EDM: JM430+AZ75DR+D430
SKU:
EDM100332
EDM: JM500+NZ50+D500
SKU:
EDM100340
JM430+AZ50R+D430: AUTOMATIC FIRE EXTINGUISHER
SKU:
EDM100360