- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EDM: CNC AWT555S WIRE CUT
Excl. GST: $176,850.00
Incl. GST: $203,377.50
Incl. GST: $203,377.50
EDM: JM32NZ COMPACT
Excl. GST: $58,000.00
Incl. GST: $66,700.00
Incl. GST: $66,700.00
EDM: CNC JMNC2010+HD50
Excl. GST: $0.00
Incl. GST: $0.00
| Weight | 12500 kg |
|---|---|
| Dimensions | 4.5 × 4 × 3.25 cm |
Description
| CAPACITY OF TANK | 4000Ltrs |
|---|---|
| WORK TABLE | 2240 X 1050mm |
| TRAVEL X | 2000mm |
| TRAVEL Y | 1000mm |
| TRAVEL Z | 550mm |
| SPINDLE HEADSTOCK TRAVEL | 600-1150mm |
| MAX ELECTRODE WEIGHT | 400kg |
| MAX TABLE WEIGHT | 8500kg |
| MAX WORKTABLE CLEARANCE | |
| MAX OUTPUT | 50A |
| VOLTAGE | 4.5kva |
| MAX PROCESSING SPEED | mm/min |
| WEIGHT NETT/GROSS | 12500kg |
| VOLUME | 58.50cm |
Shipping & Delivery
Related products
EDM: TR100 TAP REMOVER
SKU:
EDM100030
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: CNC DNC42+DN40 SUPERDRILL
SKU:
EDM100140
* The Joemars DNC42 is specially designed for drilling hard materials such as hardened steel aaloys & tungston carbide in ranges of 0.2mm-3.0 mm
* This CNC EDM drill is a production drilling machine controlled by a Heidenhain controller
*The newly developed sparking cercuits are special to the DNC42 EDM super drills to enhance machine speed excellent flushing lower wear & higher accuracy*
EDM: JM528DZ SUPER DRILL
SKU:
EDM100180
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc.
EDM: CNC DNC35 DRILLING
SKU:
EDM100200
* The Joemars CNC DNC35 Drilling EDM machine comes with arm type movable control panel design for operator comfort
* Stainless steel work table ensures stability
* Half submerged work table increases the performance of machining
* The Heidenhain TNC310 controller holds 100 sets of machining memories
* 6 Kinds of machining parameters
* Five kinds of alarm indicators
* RS-232-C/V.24 interface
* Plus many other fuctions *
EDM: CNC WT455S WIRE CUT
SKU:
EDM100230
EDM: JM430+AZ50R+D430
SKU:
EDM100330
EDM: JM500+NZ50+D500
SKU:
EDM100340
JM430+AZ50R+D430: AUTOMATIC FIRE EXTINGUISHER
SKU:
EDM100360