- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BANDSAW: BS-460G DUAL MITRE
$12,000.00
BANDSAW: BMT-260SL 227M MITRE (TAIWAN)
$3,236.80
* Quick action lock & release vice.
* Higher working height for convenience.
* Mitre cutting up to 45° with pre-set angles on the vice.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Made in Taiwan.
| Weight | 250 kg |
|---|---|
| Dimensions | 1.9 × 0.55 × 1.5 cm |
In stock
Description
| Description | Euro type horizontal bandsaw |
|---|---|
| Model | BMT-260SL |
| Capacity Round 90° (mm) | 227 |
| Capacity Rectangular 90° (mm) | 260 x 110 |
| Capacity Round 45° (mm) | 150 |
| Capacity Rectangular 45° (mm) | 145 x 145 |
| Blade Speeds (no.) | 2 |
| Blade Speeds (m/min) | 72 & 36 |
| Blade Size L x H (mm) | 2,450 x 27 |
| Motor (kW) | 1.1 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 216 / 250 |
| Volume (m³) | 1.5675 |
| Packing Size L x W x H (mm) | 1900 x 550 x 1500 |
Shipping & Delivery
Related products
BANDSAW : G-5027 DUAL MITRE
SKU:
BSH101200
* Heavy duty semi-automatic dual mitre saw.
* Control box for blade speed, descent rate & coolant.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Trigger type handle.
* Rugged fabricated steel construction.
* Easy blade change with adjustable tension.
* Built in coolant system with adjustable flow control to both sides of the cut.
* Adjustable roller guides for accurate cutting.
* Wire wheel cleans swarf off the blade while cutting.
* Made in Taiwan.
BANDSAW: CY-300N 255MM 1PH (TAIWAN)
SKU:
BSH101262
* European style bandsaw.
* Contol panel located on the front of the machine.
* Fitted with quick action lock/release vice.
* Swivel head adjustment for scaled mitre cutting.
* Emergency cut out switch.
* Coolant pump for cutting effiency and longer blade life.
* Mounted on drip tray with stand assembly.
* Hydraulic cylinder to control down feed during the cutting process.
* Made in Taiwan.
BANDSAW: CY-350RN 270MM 3PH ROUND TABLE
SKU:
BSH101266
* European style bandsaw.
* Round table.
* Contol panel located on the front of the machine.
* Fitted with quick action lock/release vice.
* Swivel head adjustment for scaled mitre cutting.
* Emergency cut out switch.
* Coolant pump for cutting effiency and longer blade life.
* Mounted on drip tray with stand assembly.
* Hydraulic cylinder to control down feed during the cutting process.
* Made in Taiwan.
BANDSAW: CY-135A 135MM 1PH (TAIWAN)
SKU:
BSH101322
* Small but quality workshop bandsaw.
* Quick action lock & release vice.
* Higher working height for convenience.
* Mitre cutting up to 45° with pre-set angles on the vice.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Made in Taiwan.
BANDSAW: CY-275 225MM 2 SPEED 3PH (TAIWAN)
SKU:
BSH101350
* Quality bandsaw with a heavy duty gear drive system and two speed motor.
* Quick action lock & release vice.
* Higher working height for convenience.
* Mitre cutting up to 45° with pre-set angles on the vice.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Adjustable length stop for repetitive cutting.
* Made in Taiwan.
BANDSAW: CY-280 DUAL MITRE 2 SPEED 3PH (TAIWAN)
SKU:
BSH101352
* Heavy duty dual mitre bandsaw with a two speed motor.
* Quick action lock & release vice, with unique sliding design.
* Higher working height for convenience.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Input support roller for long work pieces.
* Automatic blade breakage sensor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
BANDSAW: CY-355 DUAL MITRE SEMI-AUTO (TAIWAN)
SKU:
BSH101362
* Heavy duty, semi-automatic dual mitre bandsaw with two speed motor.
* Higher working height for convenience.
* Mitre cut up to -45° / +60° using a quick locking handle system.
* Automatic blade breakage sensor.
* Easy blade changing and hydraulic tensioning adjustment.
* Built in coolant system with adjustable flow control.
* Hydraulic damper controls the rate of blade descent.
* Limit switch cuts the power once the cut is complete.
* Adjustable roller guides for accurate cutting.
* Made in Taiwan.
BANDSAW: BS-280C SEMI- AUTO HORZ
SKU:
BSH102200
* This adaptable swivel head bandsaw can swivel up to 45° and 30°.
* Robust twin column construction.
* Auto power off if blade breaks.
* Stroke limit switch.
* Auto return to height which is set by limit switch.
* Strong all steel welded frame for durability and long service.
* Comes with adjustable roller stand.