- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
RIGHT ANGLE BLOCK: 600 X 375MM X 100 90DEG ZJJ RIGHT
Excl. GST: $995.00
Incl. GST: $1,144.25
Incl. GST: $1,144.25
ANNULAR CUTTER: UNI HSS 50MM X 25MM
Excl. GST: $99.00
Incl. GST: $113.85
Incl. GST: $113.85
RIGHT ANGLE BLOCK: 600 X 375MM X 100 90DEG ZJJ LEFT
Excl. GST: $548.00
Incl. GST: $630.20
* The new 500mm right angle block can be adjusted and clamped freely because of the increase of rotation angle and fixed groove, and the clamping element can be adjusted in the range of 0-90 °.
* It can also be used as a workbench extension *
* The material is made of high quality ductile iron *
| Weight | 25.7 kg |
|---|---|
| Dimensions | 0.375 × 0.6 × 0.1 cm |
In stock
Related products
WELDING TABLE: 3D 1500 X 1000 X 200MM 28.0MM 4 LEGS
SKU:
WLT20001103
WELDING TABLE: 3D 2000 X 1200 X 200MM 28.0MM
SKU:
WLT20001105
WELDING TABLE: 3D 4000 X 2000 X 200MM 28.0MM
SKU:
WLT20001112
WELDING TABLE: 2D 1000 X 1000 X 100MM CT
SKU:
WLT20001170
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
WELDING TABLE: 2D 2000 X 1000 X 100MM CT
SKU:
WLT20001174
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
TRANSPORT LIFTING RINGS
SKU:
WLT20001200
* TJ series 90 ° pipe clamp, make accurate powerful clamping 180 ° possible
* Horizontal bar can adjust the range of 40-180mm, the vertical bar has different
length specifications, and the adjustment range is also different
* The vertical tube increases the adjusting ring, which can help the adjustment better *
HOLD DOWN CLAMP: 300 X 300MM 45 DEG
SKU:
WLT20001230
* TJJ series 45 °pipe fixture can precisely clamp the welding parts with inclined
angle and can be changed up and down *
* The adjustable range of horizontal bar is 55-145 mm *
* A regulation ring is added to the vertical tube, which can help the adjustment better.
number a b c maximum load stock *
HEIGHT ADJUSTING FIXTURE: 100 X 75 X 80MM
SKU:
WLT20001370