- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
EKLIND: 9/64″ BALL HEX
$2.21
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
| Weight | 0.04 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
SKU:
AKS122470
Category: BALL HEX KEYS
Description
| BRAND | Eklind |
|---|---|
| SIZE | 9/64″ |
| TYPE | Ball End |
| LENGTH | Standard |
| PIECES | Single |
| FINISH | Grey |
| WEIGHT NETT / GROSS | 0.040cm |
| VOLUME | 0.0001cm |
Shipping & Delivery
Related products
BALL HEX KEY: BONDHUS BL 2.0MM
SKU:
AKS121718
$4.60
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: EKLIND 4.0MM CARDED
SKU:
AKS121726
$6.10
*Eklind hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw
While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools
BALL HEX KEY: BONDHUS BL 4.5MM
SKU:
AKS121728
$5.30
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 5.5MM
SKU:
AKS121732
$6.00
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 6.0MM
SKU:
AKS121734
$6.20
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 9.0MM
SKU:
AKS121740
$16.25
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: EKLIND 10.0MM CARDED
SKU:
AKS121741
$19.00
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 11.0MM
SKU:
AKS121742
$32.65
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
