- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
ADJUSTMENT SCREW: 12" WRENCH
Excl. GST: $10.21
Incl. GST: $11.74
Incl. GST: $11.74
LGF: GAMMA SWING DIGIT PLUS
Excl. GST: $105,000.00
Incl. GST: $120,750.00
Incl. GST: $120,750.00
TWIN HEAD SAW:GAMMA SWING DIG
Excl. GST: $81,345.00
Incl. GST: $93,546.75
* Equipped with electronic positioner.
* With 10” colour screen and touchscreen system.
* Radial sliding of the saw carriage.
* Pneumatic tilting heads from 90° to 45°.
* USB port to save/upload cutting lists and programmes.
* Available in 4mt or 5mt bed length.
* Can be fitted with a 500mm, 530mm or 550mm blade.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.
| Weight | 1400 kg |
|---|---|
| Dimensions | 5 × 2 × 2 cm |
Related products
TWIN HEAD SAW: MERRIT CHINA
SKU:
ALU100126
MITRE SAW; QCS-400 UP CUTTING
SKU:
ALU301040
MITRE SAW; LGF KRONOS 350MM
SKU:
ALU301050
* LGF machines are made in Italy to strict CE standards.
* Manual down stroking of the head by means of ergonomic safety lever.
* Blade protection cover with automatic closing by means of lever.
* Head rotation on its own axis at -45° / 45° with mechanical locking system.
* Manual locking system on working bench at any intermediate degree.
* Rotating working bench.
* Equiped with air clamping and mist spray.
* Comes complete on heavy duty stand.
MITRE SAW: LGF FRIDA 400MM Blade Manual Down
SKU:
ALU301100
* High quality Italian machine.
* Cutting off with manual downstroke of the blade.
* Rotating table between 80° and -80°, easy setting to any angle.
* Tilting head from 45° to -45° using mechanical blocking system.
* Horizontal pneumatic clamping system with rubber pads.
* Spray mist lubrication.
* Air filter and air gun.
V NOTCHER: LGF BIFRA
SKU:
ALU301250
* High quality Italian machine.
* Unique two blade design V-notching machine.
* Automatic downfeed of the saw carriage.
* Pneumatic adjustment of the saw blade feeding.
* Hand wheel operated work bench with depth stop.
* Full protection of the working area with automatically closing hoods.
* Vertical pneumatic clamping system with rubber pads.
AUTO CUT SAW: OMC BIFRA 550 A UP CUT
SKU:
ALU301305
** This OMC automatic cut off saw offers the utmost in cutting safety and speed.
** Fitted with auto pneumatic clamping and mist spray unit for a clean cutting cycle.
** Possibility of performing all angles from 20° left to 20° right.
** Fully enclosed working area.
** It is fitted with blades Ø 550mm.
DOUBLE MITRE SAW: LGF ZETA
SKU:
ALU302000
* This LGF ZETA double mitre saw combination is ideal for the fabrication of aluminium joinery.
* Both saw heads are capable of compound mitres.
* Each table has horizontal air clamping.
* Central controls make the pneumatic cutting action simple and hands free.
* Equipped with auto lubrication for smooth cutting and clean finish.
* Comes with central workpiece support.
LGF: GAMMA SWING DIGIT PLUS
SKU:
ALU302210
* Equipped with electronic positioner.
* With 10” colour screen and touchscreen system.
* Radial sliding of the saw carriage.
* Pneumatic tilting heads from 90° to +45°.
* USB port to save/upload cutting lists and programmes.
* Available in 4mt or 5mt bed length.
* Available with a 500mm, 530mm or 550mm blade.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.