| DESCRIPTION | End Mill – Standard Length |
|---|---|
| MATERIAL | HSS-M42 8% Colbalt |
| DIAMETER | 25.00mm |
| FLUTES | 4 Flutes |
| LENGTH O/A | 121mm |
| FLUTE LENGTH | 45.0mm |
| SHANK | Flat Shank – 25.0mm |
| FINISH | Ground – Bright |
| WEIGHT NETT/GROSS | 0.350kg |
| VOLUME | 0.0001cm |
Description
SKU : EM-7405025
Price per Unit
$85.00 (Exc GST)
$97.75 (Inc GST)
FEATURES:
* This End Mill is a standard series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
| Weight | 0.35 kg |
|---|---|
| Dimensions | 0.14 × 0.03 × 0.03 cm |
Specifications
Description
Shipping & Delivery
Related products
END MILL: HSS 11.0MM STD
SKU:
EM-700432
END MILL: HSS 13.0MM STD
SKU:
EM-700440
END MILL: HSS 18.0MM STD
SKU:
EM-700460
END MILL: HSS 19.0MM STD
SKU:
EM-700464
END MILL: HSS 7/16″ STD
SKU:
EM-700640
END MILL: 3.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210200
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 14.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210214
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 18.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210218
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *