- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PIPE BENDER: TANNER HHW-40A HYDRAULIC
Excl. GST: $4,600.00
Incl. GST: $5,290.00
Incl. GST: $5,290.00
HYDRAULIC HORZ BENDER: HHP-40 51MM CAPACITY (PIPE)
Excl. GST: $3,200.00
Incl. GST: $3,680.00
Incl. GST: $3,680.00
HYDRAULIC HORZ BENDER: HHP-22 42MM CAPACITY (PIPE)
Excl. GST: $3,200.00
Incl. GST: $3,680.00
The HHP-22 hydraulic bender is a very versitile machine with mulitple applications * Bending for flat plate up to 120mm in height * Pipe bending – steel pipe to 37mm * Punching 16-35mm * Shearing 10 x 100mm * Has large working table of 630mm x 1100mm *
| Weight | 420 kg |
|---|---|
| Dimensions | 1.23 × 1.31 × 1.1 cm |
Description
| MODEL: | CP-42A |
|---|---|
| FUCTION: | Bend Pipe and Flat, pipe, punch, shear. |
| MAX BENDING POWER: | 22 Ton |
| MAX BENDING HEIGHT: | 120mm |
| CARRIAGE STROKE: | 200mm |
| FEED SPEED: | 29mm/Sec |
| TABLE DIMENSIONS: | 630mm X 1100mm |
| ELECTRIC MOTOR: | 2HP 1 Phase |
| MACHINE FOOTPRINT: | 1230 x 1310 x 1100mm |
| WEIGHT NETT/GROSS: | 620kg |
| VOLUME: | 1.7724cm |
Shipping & Delivery
Related products
PIPE BENDER: 1/2″ – 2″ HYD 6 FORMERS CHB-2
SKU:
PB-132116
PIPE BENDER: HYD TANNER 6-22MM HAND HELD HHW-22B
SKU:
PB-132120
* Simple type hydraulic pipe bender hand held,
* Simple trigger action to extend ram for bending.
* Suitable for bending soft copper, brass and aluminum tubes.
* Suitable for trades people involved in plumbing, air conditioning, refrigeration and hydraulic applications etc.
* Quick and easyy to change formers.
* Bending range to 90 degrees.
PIPE BENDER: 1/2″- 3″ WITH CASTORS & 8PCS FORMERS HHW-3
SKU:
PB-132142
PIPE BENDER: 1/2″- 2″ ON STAND 6PCS FORMERS HHW-2F
SKU:
PB-132144
PIN: TO RETAIN BOBIN
SKU:
PB-134144
PIPE BENDER: TANNER HHW-40A HYDRAULIC
SKU:
PB-134300
* Simple type mechanical/hydraulic pipe bending machine complete with fine formers.
* Manual clamping of bending dies with quick release clamp.
* Setting the angle is by digital readout on the control panel.
* Bending operation is activated by remote foot control.
* A total of 33 sets of dies are available for this model.
HYDRAULIC HORZ BENDER: HHP-40 51MM CAPACITY (PIPE)
SKU:
PBH1002025
TUBE BENDER: TANNER JTB-50 HYDRAULIC 40MM CAPACITY
SKU:
PBT121050
* Simple type mechanical/hydraulic pipe bending machine complete with fine formers.
* Manual clamping of bending dies with quick release clamp.
* Setting the angle is by digital readout on the control panel.
* Bending operation is activated by remote foot control.
* A total of 33 sets of dies are available for this model.