- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAPER SPINDLE: L/H 1/2" WHITWORTH THREAD
Excl. GST: $25.00
Incl. GST: $28.75
Incl. GST: $28.75
TAPER SPINDLE: L/H 5/8" BSW THREAD
Excl. GST: $41.66
Incl. GST: $47.91
Incl. GST: $47.91
TAPER SPINDLE: R/H 1/2″ WHITWORTH THREAD
Excl. GST: $41.66
Incl. GST: $47.91
* This buffing spindle fits bench grinders with 1/2 right hand thread shafts
* Spindle is tapered to allow for the fitting of polishing mops *
| Weight | 0.3 kg |
|---|---|
| Dimensions | 0.13 × 0.05 × 0.05 cm |
In stock
Related products
PME SISAL: 100 X 3S 12.5T 10MM
SKU:
BMA436840
PME W/S MOP: 75 X 2S 10MM
SKU:
BMA436908
PME W/S MOP: 75 X 3S 10MM
SKU:
BMA436910
PME W/S MOP: 100 X 1S 10MM
SKU:
BMA436912
PME W/S MOP: 100 X 2S 10MM
SKU:
BMA436914
DOLLY MOP: 100 X 50P X 10MM ID
SKU:
BMA439000
* These mini dolly polishing mops can be used on a bench polisher with a tapered pigtail. Or with a mandrel in a drill or air tool.
* Small polishing mop must be used with a polishing compound – Either a Medium cut and colour compound or polishing compound.
* If the item is badly scratched, use a dry sisal dollie with cutting compound first.
* To get the best finish you must have achieved a good pre-polish finish and have a good flat surface to create the best polished effect.
* A very universal mop that suits polishers, fabricators, sculptors, silversmiths etc.
DOLLY MOP: 150 X 75P X 10MM ID
SKU:
BMA439006
* These mini dolly polishing mops can be used on a bench polisher with a tapered pigtail. Or with a mandrel in a drill or air tool.
* Small polishing mop must be used with a polishing compound – Either a Medium cut and colour compound or polishing compound.
* If the item is badly scratched, use a dry sisal dollie with cutting compound first.
* To get the best finish you must have achieved a good pre-polish finish and have a good flat surface to create the best polished effect.
* A very universal mop that suits polishers, fabricators, sculptors, silversmiths etc.
POLISHING BONNET: 180MM
SKU:
BMA439300