- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
MILLING VICE: 100MM NICON LOCK DOWN F/BASE MMV100
Excl. GST: $420.00
Incl. GST: $483.00
Incl. GST: $483.00
MILLING VICE: 200MM NICON LOCK DOWN F/BASE MMV200
Excl. GST: $965.00
Incl. GST: $1,109.75
Incl. GST: $1,109.75
MILLING VICE: 160MM NICON LOCK DOWN F/BASE MMV150
Excl. GST: $585.00
Incl. GST: $672.75
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on fixed base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
| Weight | 35.7 kg |
|---|---|
| Dimensions | 0.25 × 0.48 × 0.15 cm |
In stock
Related products
MILLING VICE: 100MM WPV-100 SWIVEL BASE
SKU:
VM-240100
MILLING VICE: 150MM WPV-150 SWIVEL BASE
SKU:
VM-240150
MILLING VICE: 125MM MODULAR PULL DOWN JAWS HARLINGEN
SKU:
VM-249284
* High precision modular Milling Vice by Harlingen
* Accuracy to 0.005mm/100mm
* Manufactured from high alloy resitance steel
* All Harlingen vices and accessories are modular and interchangeable
* Perfect alignment is achieved to provide different workholding solutions
* Vices can be matched side to side with highest precision and minimal set up times
* Max jaw opening 150mm
MILLING VICE: 150MM VER-LOCK LV60 SWIVEL BASE TAIWAN
SKU:
VM-9963120
* LV-60 Ver-lock Machine Vice
* The Ver-lock vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* When clamping, a downward pressure of 1kg is exerted by the movable jaw for every 2kg of clamping pressure, preventing the work piece from tilting
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360
* Manufactured in Taiwan
MILLING VICE: 100MM NICON N201S SWIVEL BASE
SKU:
VM-9963180
* N201S-100 Machine Vice
* The Nicon 201S vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
* This Nicon milling vice comes mounted on a swivel base for versatility while machining
* Low design with covered leadscrew
* Jaws are hardened and precision ground with maintained accuracy and repeatability
MILLING VICE: 100MM NICON LOCK DOWN S/BASE N-171
SKU:
VM-9963250
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on swivel base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 200MM NICON LOCK DOWN S/BASE N-171
SKU:
VM-9963254
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on swivel base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 100MM NICON PRECISION S/BASE N-151S
SKU:
VM-9963266
* The Nicon N151S-100 vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Mounted of fixed base
* Swivel base is graduated to 360 deg
* Jaws are hardened and precision ground with maintained accuracy and repeatability * Precision Lock Down milling vice
* Accuracy in squarness0.02/100mmy while machining
* Vice can be quickly aligned through longitudinal provided in the base of the body