- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
ARMOUR PIERCING DRILL: Co8E MT5 50.0MM (SOMTA)
$590.00
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
| Weight | 3.7 kg |
|---|---|
| Dimensions | 0.36 × 0.05 × 0.05 cm |
In stock
Related products
ARMOUR PIERCING DRILL: Co8E MT3 19.0MM (SOMTA)
SKU:
DBT2632826
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
ARMOUR PIERCING DRILL: Co8E MT3 20.0MM (SOMTA)
SKU:
DBT2632828
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
ARMOUR PIERCING DRILL: Co8E MT3 21.0MM (SOMTA)
SKU:
DBT2632829
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
ARMOUR PIERCING DRILL: Co8E MT3 25.0MM (SOMTA)
SKU:
DBT2632838
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
AMROUR PIERCING DRILL: Co8E MT4 28.0MM (SOMTA)
SKU:
DBT2632844
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
ARMOUR PIERCING DRILL: Co8E MT4 32.0MM (SOMTA)
SKU:
DBT2632852
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
ARMOUR PIERCING DRILL: Co8E MT4 40.0MM (SOMTA)
SKU:
DBT2632860
* Maunufactured by Somta SA
* Armour piercing drills were designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 130deg notched point
* Available in morse taper shank from MT2 to MT5 from 11.0 to 50.0mm
RAIL DRILL: Co8E MT3 32.0MM (SOMTA)
SKU:
DBT2632886
* These special drills are manufactured by Somta SA
* Rail drills are designed for drilling work-hardened and heat treated steels
* They are capable of drilling materials like Hardox and is the recommended drilling equipment by the manufacturers ( SSAB of Sweden ) of this range of tough material
* Manufactured to works standard with 15deg helix and 135deg notched point
* These drills come with MT2, 3, 4 tapers with a range from 22.0 - 35.0mm
* Short flute length and specialy designed for driilng railway lines