- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANER: TANNER TP-206 600MM 2 SIDER SPIRAL HEADS
$13,600.00
* TANNER TP206 Planer with 760mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Power rise & fall
* Cutterblock with antikick-back guards
| Weight | 920 kg |
|---|---|
| Dimensions | 1.04 × 1.36 × 1.39 cm |
Description
| CUTTING WIDTH | 600mm |
|---|---|
| CUTTING HEIGHT | 12 – 200mm |
| MIN LENGTH | 300mm |
| MIN THICKNESS | 6.0mm |
| MAX DEPTH OF CUT | Up 4.0mm – Down 3.0mm |
| TABLE AREA | 965 X 787mm |
| TABLE ROLLERS | 65.0mm |
| FEED SPEEDS | Variable |
| FEED RATE | 8-11m/min |
| CUTTERHEAD SPEED | 6500mm |
| CUTTERHEAD | Spiral Cutterhead |
| TCT TIPS | 15 X 15 X 2.5mm |
| MOTOR X TWO | Top 5.5kw – Bottom 4.0kw |
| WEIGHT NETT/GROSS | 850/920kg |
| VOLUME | 1.966cm |
| PACKING SIZE LX W X H | 1040 x 1260 x 1390mm |
| OVERALL DIMENTIONS | 1080 x 960 x 1382mm |
Shipping & Delivery
Related products
PLANER: 12″ MB103 1PH
SKU:
TKN112120
* This machine comes with a powerful 3hp single phase motor
* Equiped will Four knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ 2.2KW 1PH MOTOR UNDER
SKU:
TKN112618
* This Tanner TP-1040F 16" Planer comes with a 2.2kw motor
* Equiped wilh 3 blade cutter head
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Fully enclosed carbnet stand
PLANER: TANNER TH410A 16″ 3HP 1PH INDUSTRIAL S/HEAD
SKU:
TKN112620
* This Tanner 16: Industrial Planer comes with a 3.0hp single phase motor
* Equiped wilh three knife 72.0mm cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Heavy cast iron table
* Top mounted dust chute
PLANER: TANNER CT-508 20″ 3HP 1 PHASE
SKU:
TKN114210
* The TANNER CT-508 20 Planer provides a cutting capacity of up to 20" wide
* Maximum planing thickness is 6.0mm
* With rollers situated on the top of the machine allows stock to pass over the machine
* Using the in-feed and out-feed roller support operation is easy and convenient
* An oil-bath lubricated gear box provides very smooth feeding
* Lifting lever is provided to allow for easy maneuverability
* The unit is the result of quality engineering which meets with CSA standards
* All components precision machined for complete interchangeability and added value
* A rugged machine which has been proven in the field for many years
PLANER: TANNER CT-508 20″ 5HP 3PH
SKU:
TKN114234
* The TANNER TPC-508 offers a cutting capacity up to 20 wide and a depth of 6.0mm
* Solid cast construction make this machine very rigid
* Four heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Cutterhead is dynamically balanced to provide smooth running and a good finish
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* A proven perfomer over many years of development
PLANER: TANNER TK-201F 20″ 5HP 3PH INDUSTRIAL S/HEAD
SKU:
TKN114238
* The TANNER TK-201F Industrial offers a cutting capacity up to 20"
* Cutting depth of 6.0mm
* Solid cast construction make this machine very rigid
* Heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* This model is fitted with a Spiral Cutterhead
* This head is dynamically balanced to provide smooth running, low noise output and a good finish to the workpiece
PLANER: TANNER TP-208 800MM 2 SIDER SPIRAL HEADS
SKU:
TKN114356
* TANNER YP208 Planer with 800mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 20hp main motor
* Power rise & fall
* Cutterblock with antikick-back guards
PLANER: TANNER FOUR SIDER 300MM 7.5HP
SKU:
TKN115020
* TANNER M-412 side Planer
* Industrial quality machine with table surface of high ductile cast iron
* Cutterhead guard is manufactured from HSS, heat treated
* Numerical control panel allows sizing adjustment of cutters for convenience and rapit settings
* Fitted with overload protection
* Feeding can be opperated in jog mode for accurate settings
Three phase motor drive.
Powerful motor drive for each spindle.
Digital position control for accurate and easy setting.
7,000 rpm high spindle speed.
Compact construction. Maximum stability.
Variable feed speed.
See-thru top guard.